RogNeedham

...and another link here for those that have not picked it up from the Chitchat post

Rog

here

Hello Alistair

I went to work in 7 yesterday (23rd) but colour green with black nosecone and reg K777 matches. Would have been at Markfield about 0745 then again 1715 ish

Don't think I lent my car to anyone at lunchtime 😬

Ok thanks for measurements. Will measure my output pipe first thing tomorrow

Cheers

Rog

Hi, please advise the diameter of the inlet pipe

Thx

Rog

Hi Alan ....you have BM

Rog

Thanks guys... No heater on my car. Roughly how many litres? ... About 5?

Rog

I've read numerous threads on this subject but I seem to have a slightly different set up.

SLR with roller barrels and a Stack dash (so temp sensor ECU and gauge are in the rear by pass pipe near the pedal box)

Having had some useful pics from other club members ref the PRRT set up, I've now installed this along with the replacement part in the thermostat housing, however others seem to have blocked off the stat housing where the rear bypass pipe is fitted and the bypass outlet on the water rail.

Given that I have had to retain the rear bypass pipe to keep the sensors in situ, is there a preferred process to no fill the system and avoid airlocks.

Do I fill remove rear by pass pipe from water rail and fill from there...slowly?

thx in advance

Rog

looking for a kind soul, based somewhere nr Fleet to deliver a carbon rear wing to (ideally) , Derby, Notts area or Leicester

happy to make a NTL donation

thx

Rog

Thx Simon please can you send a pic?

A10. :)

Anything looking a little tired / slightly is fine as it will be painted...thx

Rog

Hi Alastair

funny thing was I said to Mrs N "I assume the owner is at this house [pointing at the cottage] - we should say hello" . To which she replied "you can't just knock on someone's door and invite yourself in because you have the same car!"

you post has just proved her wrong 😬

Andrew

if MOCA2cv suggestion doesn't work - I'm sure I have on in the garage. Let me know if still interested

Rog

looking very smart in yellow parked up in Little Longstone, Derbyshire yesterday afternoon

my 7 was parked at the Hassop Stn cafe

rear mirror (Caterham part 73463B) abrasion to black housing - see pic £50.00

L/H & R/H kneel panels (Caterham parts 78018 & 78019) - £15 for the pair

here

all plus P&P - located nr Derby

Rog

Rich

If I recall it came with the tall FIA roll bar I bought part way through the ownership. So I guess it might be a bit big? sorry Rich

Rog

Edited by - RogNeedham on 14 Feb 2014 23:51:12

Rich

If I recall it came with the tall FIA roll bar I bought part way through the ownership. So I guess it might be a bit big?

Rog

Hi Rich

I am sure I have something that is from that era that I used to have on my old blue xflow. Travelling in Europe at the moment will look in garage on Friday

Rog

Anyone got the 'outer' part including the rubber button please 🤔

Cheers

Hi Neil.... roughly how many miles has the R400 silencer done?

whose make is it?

thx

Rog

I am in the throes of investigating a 'getting first gear' problem. Although initial inspection of the CRA reveals no immediate cracking another club member is kindly going to assess its overall condition

the build manual I have states the following:

"Do not remove the plastic sleeve from the clutch arm pivot pin"

it doesn't state whether or not this applies to dry sump or non-DS?

should a dry sump 6 speed have such a sleeve....as mine currently does not

thx

Rog

thx SM25T - currently north of Derby but will be travelling to EoB next week

will send you a BM Matthew

Hi SL91

now how do I put this without getting all 'Kenneth Williams' (matron!)

mine is 7" in diameter - there I said it

complete with jubilee clips to hold it place (this isn't getting any better)

BM - and we can sort out the details

oh - yes it's bare aluminium - not black

Rog