Jump to content
Click here if you are having website access problems ×

RogNeedham

Leadership Team
  • Posts

    2,414
  • Joined

  • Last visited

  • Days Won

    3

Posts posted by RogNeedham

  1. echo Nick's comments. I spent a few hours walking the circuit to watch the racing at night well away from the GP circuit...out on the Nordschleife proper. All kins of crazy shanty towns get assembled -takes the locals days.

    Spent a pleasant 45mins chatiing to 4 local guys 'n gals after i tripped over a tree root. Was then asked if 'I fancied a sausage' which was bit disconcerting in a dark German wood at 2 in the morning - thankfully they meant a bratwurst - or at least that what they told me it was*hehe*

    not a corporate event - just lots of mad locals having a great time

  2. I have recently fitted a new tank. When I removed the old tank and disconnected the electrical feed, I noticed that the connector on the pump side then became loose, thereby making reconnection impossible once fitted to the new tank  - ie. nothing to push against.

    Before disconnecting I'm sure i noticed that the black electrical connector on the wiring loom side pushed into the pump connector so that it was flush with the tank.

    I asked a local auto electrican if he could refix the fuel pump connector  to the fuel pump body so that it was firm. He has done this but the loom connector now sits about 10cm proud from the tank side.

    I now have a major fuel leak from this area....something is not sealing right

    Anyone know of a decent pump repair outfit in the Midlands.

    Pump works fine - it's just that the leak will screw my fuel consumption*banghead*

  3. Got a shiny new tank and with the car having a Stack8130 - I set about the calibration process.

    I have donwloaded the manual from Stack website.

    I have added my 4 litre 'reserve' and then, as the good book, says tried to enter calibration mode - which should be buttons 1&2 together (left to right)

    At this stage dash should read:

    Tank Qty          0L

    Reading        255

    However when pressing buttons 1&2 I get following display:

    Stack 800      V5.10

    ST8130KMP    11/09/02

    I'm pretty convinced buttons are wired 1-4 left to right because 3rd button from left changes the display layer - confirmed by the manual

    any advice gratefully received*banghead*

     

     

  4. *thumbup*On behalf of a mate and his recently acquired track day device!


    Engine is installed in a 2002 MG TF 160. The engine starts fine & idles smoothly, but when it's revved, it hits a limiter at about 5,750rpm. Snap-On diagnostics yields fault code P1522 which it says is "Variable Intake Solenoid #2 Circuit Malfunction". The solenoids are both measuring the resistance they should (7 ohms) and the brown, blue and black plugs to solenoids and temp sensor are all plugged in as they should be. Any help on solving this problem would be greatly appreciated :) Thanks
     

    Sounds a bit ECU to me..but would welcome more knowledgeable input

    rog

  5. It's time for this excellent car to go to a new home, as a newer version has come along to replace it 😬

     

    Link to pic below

    here

     

    Mileage: 54202

    MOT expiry: Nov 2014

    Keepers: 2 lady owners, including Mrs N

    Service history: Porsche main dealer and Zentrum independent specialist in Nottinghamshire. Last serviced May 2014 @ 48k miles

    New rear tyres fitted - Feb 2014

     

    Spec: manual transmission, electric windows, aircon, full black leather interior, CD player, heated seats, wind deflector, Meteor Grey metallic

     

    This car has run like the proverbial Swiss watch, having recently completed a 2700mile road trip round France (see pic). It has never been near a track and regularly returns c.30-31mpg. I've heard all the comments about 'can't afford a 911' blah, blah - but these are beautifully balanced cars.

     

    Priced at £14250

    Location: Derby

    Contact: via BM or 07528 825805

    Rog

  6. Hi Finlay,

     

    Just fished out a lens from the bits bin in the garage. I'll do you a deal on postage! How about I deliver by hand in the 7 if you pay the ferry 😬

     

    Only joking, happy to post....or thinking about it a fellow 7er mate who lives near me is heading to outer Hebrides in a week or so, I could ask him if he could help out *wavey*

    Rog

×
×
  • Create New...