RogNeedham

Graham

YHM

Rog

A few bits and pieces -will send pics to those requesting them

I'm in Derby

Fuel filler casting ...like this here - £20 SOLD

Wheel stud cover plate – Prisoner wheel - £10 OFFERS

10 Bar VDO electrical oil pressure gauge - £20 OFFERS

2x n/s xflow engine mounts (no lower rubber) - £10 each OFFERS

1x o/s xflow engine mount (no lower rubber) - £10 OFFERS

Facet Electric fuel pump (red dot) - £offers SOLD

Rog

Edited by - RogNeedham on 21 Sep 2009 19:18:18

pics can be sent. 2x threaded bolts are missing - otherwise good condition

£75

located in Derby

Rog

back off hols - I'm prepared to split the sets - if anyone wants only springs or dampers

blatmail or call on 0780 1670 765

Rog

BTTT -then off to ebay

Rog

‘Green’ Rear Spring Damper set

Dampers – eye 2 eye length = 470mm Part number visible: 811 2170M100

Springs - open length = 270mm coil diameter = 10.2mm c.250lb

good condition - £150

Rear Spring Damper Set

Dampers – eye 2 eye length = 470mm Part number visible: 74502 2170M1

Springs - open length = 270mm coil diameter = 10.7mm c.250lb

Used and a bit rusty - £85

link to pics will be available as soon as I can get Webshots to upload them properly.

Alternatively I can send pics directly to anyone interested

I'm based nr Derby

Rog

Hi Ian

YHM

Rog

John

this might be your lucky day. I have such a screen that came with my current car. I'm trialling a brooklands. I think a couple of of the captive threads bolts are missing however?

interested. Can take some pics if you want

you can get me on 0780 1670765

Rog

dark/green /blue with clams - passing the Old Inn Mullion, Cornwall. Lunchtime July 28

Mrs N and I were just discussing how good some of the roads were had we gone to Cornwall in the 7

indeed Malc - a feisty sprinting competitor of some repute 😬

...to those in the know 😬

Pendennis - springs aren't off the car yet - but will BM with length 'on car'

Rog

when I can find a set of more road-use friendly M0 dampers and std(ish) front springs - these items will be for sale with a set of M1 dampers.

I know they seem very stiff but I am relaibly informed that with 6 working coils and 10.13mm coil diameter - this equates to 340 lb! anyone likely to be interested?

Rog

BTTT

Rog

looking for some advice. I have just purchased a set of rear Bilstein shocks and springs. They were advertised as 'M0'. On closer inspection the number ends M100

according to Brett at CCM numbers should end M0 or M1 - so he's confused

any ideas...yes they are off a 7

Rog

I'm down that way on a business trip if anyone needs anything collecting. Blatmail or contact on 708 167 0765

Rog

Hi

Item 12) - second dibs ...(i think) full doors only please

Rog

..is it possible to do this in situ without removing the exhaust primaries?

access looks pretty tight to me from above or below

Rog

Tim

FYI - I spent a while looking and then contacted Mike Barnby directly. He suggested KN - they have sets of chrome centre caps (he stated KN were his supplier)

Rog

following fitment of a de dion with the underslung lug (rather than through-the-tube), I need a pair of the above ideally with adjustable platforms.

Rog

thx to Geoff and the chaps who asked if everything was ok after my "off" just after lunch ☹️

car at home ready to take to CCM to await the financial misery *eek*

apologies for closing the track

Rog

seen you a cuple of times - once near Morley church, aonther time turning left at Rose & Crown, Smalley - usually c.0715-0730

are you local to Derby?

Rog

as above - please send pictures if poss

Rog

Hi Norman

what I like about the system is the fact that I can store the whole lot under the ceiling of the car port. My garage isn't big enough for a 2 poster.

Rog

edited & BTTT

Rog