Jump to content
Click here if you are having website access problems ×

Paul Richards

Area Representative
 View Profile  See their activity

  • Posts

    3,735

  • Joined

  • Last visited

  • Days Won

    8

 Content Type 

Everything posted by Paul Richards

  1. Paul Richards
    Posting on behalf of Alan Dixon. He would like just one.
  2. Paul Richards
    We'll look forward to the pictures.
  3. Paul Richards
    Nosecone is normally already fitted to the car when kit is delivered. 2 Dzus fasteners at top and 2 dzus fasteners at bottom.
  4. Paul Richards
    ESV will arrive at Blyton mid/late afternoon on Saturday, so will be available for BBQ on Saturday evening for those camping. A little help erecting the awning on Saturday would be appreciated.
  5. Paul Richards
    It's an early '92 kit that was registered 09/93. Thanks for the offer, I'll keep it in mind. Hopefully the ear took the force and nothing else is damaged at the rear Nigel Are you sure? I thought it was a 2003 registered car. Sorry I 've not been able to offer any help as I've got a lot on at the moment preparing for trip to Picos. Give me a ring if I can offer some advice.
  6. Paul Richards
    Take the wire off the sender and put it to earth with the ignition switched on. If gauge goes all the way across then gauge is OK and it's a sender problem. Senders do appear to be more problematic than gauges,.
  7. Paul Richards
    I will be there manning ESV and will see Mav at next weeks MADS meeting. Is that any help?
  8. Paul Richards
    Tom ESV is visiting various places if seller can get them to it. See ESV Diary
  9. Paul Richards
    here
  10. Paul Richards
    If you have the removable diagonals it could be coming from there. Try tightening the bolts and a adding a bit of lube. Edited by - Paul Richards on 6 Aug 2013 13:12:17
  11. Paul Richards
    Redline - 01883 346515. Give it a couple of minutes before you have lots of posts advising to do away with the foam.
  12. Paul Richards
    Live axle car? A frame bush?
  13. Paul Richards
    "Powder coating - Aylesbury" That'll take a lot of powder 😬 I've successfully completed the job using a bolt and sockets. Needed to tighten and then hit bolt with hammer before tightening a little more and repeat - several times.
  14. Paul Richards
    Ditto. I had a tow bar fitted to my new VW by local specialists. No separate indicator for tow bar electrics, but on board computer was altered for trailer including disabling parking sensors and automatic parking when trailer attached. Dash display now shows a trailer drawbar at rear of car when trailer attached - COOL
  15. Paul Richards
    Nigel Connection of pipes shouldn't matter. FYI my water rail is connected to top heater hose as yours. Blatted this week and heater matrix cool but air drawn though heater still feels a little warm as ambient temperature is high. Just make sure valve is fully off and if still too hot seal heater outlet with gaffer tape, but doubt this will be necessary if heater valve is properly off.
  16. Paul Richards
    Red/Ali??? Are you sure you didn't just see a reflection in a shop window? 😬
  17. Paul Richards

    Fuel Filter

    Paul Richards replied to Dave B's topic in TechTalk

    What engine?
  18. Paul Richards
    Fiddly job, but replaceable. Spare bulbs available from Maplins.
  19. Paul Richards
    Ahmed I've had to replace my cap a few times - they seem to be very poor. I now carry a spare.I suspect it's the hard driving that has shown up a dodgy cap rather than the modification. I've modified my cooling system and it's seems to work fine with no problems.
  20. Paul Richards
    There are some in the Car Buyer Solutions Catalogue. Not sure whether they are big enough. You may be able to make something of the cargo nets with the hooks. See page 228 :- Cargo Nets Edited by - Paul Richards on 12 Jun 2013 16:56:48
  21. Paul Richards
    If I'm not mistaken, are revolution nuts not specific to the wheels. In other words, I think they have a long shoulder that fits through the wheel. You may have to obtain from Revolution.
  22. Paul Richards
    Probably been to the excellent Dunsfold Handling day.
  23. Paul Richards
    Hot starting click?? Retain original starter and just do the relay mod for a tenner. BM me if you need details.
  24. Paul Richards
    I think you'll find that even on a metric chassis it is a 1/2 inch UNF bolt with a 3/4 AF nut. Metric chassis still uses the same size bushes on the A frame etc.
  25. Paul Richards
    Quoting TBKBABABTIM: E.G. Doesn't mention using a sleeve in the bottom mounting which can't be right Assume you are now talking about front shock absorber.
×
×
  • Create New...