Jump to content
Click here if you are having website access problems ×

Paul Richards

Area Representative
 View Profile  See their activity

  • Posts

    3,735

  • Joined

  • Last visited

  • Days Won

    8

 Content Type 

Everything posted by Paul Richards

  1. Paul Richards
    http://lowflying.lotus7.club/2003/2003_06_02_Starter.pdf
  2. Paul Richards
    Silicone should be ideal.
  3. Paul Richards
    All seat belt fittings are all 7/16 UNF.
  4. Paul Richards
    You buy from those suggested by Jonathan and cut to length.
  5. Paul Richards
    Use longer bolts (7/16 unf) and fasten both belts to the same one using appropriate spacers.
  6. Paul Richards
    If it is the K click it normally occurs when the engine is hot. Don’t waste money on a new starter. Spend £10 fitting a relay before you do anything else. http://lowflying.lotus7.club/2003/2003_06_02_Starter.pdf
  7. Paul Richards
    Looking at your picture I think your tyres are fitted correctly.
  8. Paul Richards
    Yes. I’ve changed them. Easy job.
  9. Paul Richards
    Snail mail. Will use it as part of a future experiment to fit a top hose thermostat and a laminova.
  10. Paul Richards
    Yes. It's from a k series. It's the water rail from cylinder head to top hose. I'll take it. Let me know what cost of post and packing is. I have sent you a blatmail.
  11. Paul Richards
    Stu. I may have one. It’s a 7/16th UNF bolt. I’ll have a look later.
  12. Paul Richards
    Lift onto 4 axle stands as suggested. Alternatively if you do not have 4 axle stands and as you are working on seat mounts raise up the car and put blocks or similar under the wheels.
  13. Paul Richards
    Lift onto 4 axle stands as suggested. Alternatively if you do not have 4 axle stands and as you are working on seat mounts raise up the car and put blocks or similar under the wheels.
  14. Paul Richards
    Lift onto 4 axle stands as suggested. Alternatively if you do not have 4 axle stands and as you are working on seat mounts raise up the car and put blocks or similar under the wheels.
  15. Paul Richards
    Lift onto 4 axle stands as suggested. Alternatively if you do not have 4 axle stands and as you are working on seat mounts raise up the car and put blocks or similar under the wheels.
  16. Paul Richards
    Andrew. You have mail.
  17. Paul Richards
    Rear anti roll bar wanted to suit S3.
  18. Paul Richards
    Sounds more like a cracked or dodgy engine mount.
  19. Paul Richards
    If you are referring to the steering arms that form part of the rack. I suggest you obtain some of the split plastic pipe that is normally white and used to cover central heating pipes next to the radiator. Cut it to length and either paint it black or cover with carbon tape and simply clip over the arm. Looks smart.
  20. Paul Richards
    Thanks for your replies.
  21. Paul Richards
    Anybody got a copy or link to the Caterham workshop notice for removal of the charcoal canister?
  22. Paul Richards
    Sounds like it could be the k series “click”. Usually happens when hot. Could you hear a click from the MFRU (black wedge shaped block near or under ECU) when starter button pressed? Check with fly lead as SM25T suggests and if it works fit a relay. Message me if you need instructions.
  23. Paul Richards
    Sorry. Incorrect link shown above. Try https://caterhamparts.co.uk/other/755-throttle-cable-lhd-rover-a-rhd-duratec.html
  24. Paul Richards
    Hi Jig Throttle cable for Sigma is a Rover one and similar to the one used on. K series 7 but longer. Correct cable is HERE. However I think I have a new one in my garage that you can have for £35. I may also have a new alternator belt if you are interested but I'll have to check.
  25. Paul Richards
    East Coast Fibre Glass Supplies for me. I used cable tie ones for the top ones and stud ones for the bottom.
×
×
  • Create New...