Graham Torbitt

Hi Steve. YHM re screen. Cheers Graham visit Carrotland.co.uk

Hi Joe, I understand that this guy is good url=http://www.enginetuning.net/]here though i haven't used him. Joe, can you drop me a BM or call and leave me your phone number as I've lost it...... we must get those spaniels to you Cheers Graham visit Carrotland.co.uk

Sorry slight hijack Martin, I guess how often you wash the undwear is relative to the number of spins you have 😬 😬 😬 Maybe that should have been skids Graham visit Carrotland.co.uk

I cannot find the thread at the moment but here are the pictures of the header tank install when my car was still xflowed. Interestingly I was in the 7 workshop last week talking to Chris and noticed that he also puts the header tank high on the bulkhead above the passengers knees..... he says it's too low in the nose If you want any more picture blatmail me and I'll dig some out, I can probably find the notes I wrote for wheely somewhere given time..... visit Carrotland.co.uk

Norwich Epsom Caterham Redline Brise 7 Workshop Norwich. I'm travelling from Norwich to Epsom for a meeting on the 15th March and then back in the afternoon via Caterham, Redline, Brise and the 7 Workshop. I'll also be at Cadwell on the 19th March. If it will fit in a 5 Series then I can probably help. ......but then again you probably couldn't lower yourselves to accept help from a BMW driver BM me for details Graham Edited by - graham torbitt on 10 Mar 2007 14:55:29 as meeting date has changed Edited by - graham torbitt on 10 Mar 2007 14:56:17

Hi Sam, I assume that you have pulled the retaining screw(s) out from underneath and I think the pump jets need to come out from above as well, picture here You also have BM Cheers Graham visit Carrotland.co.uk

Mav, You have mail Graham .... All these smillies and the best I can manage is an ... visit Carrotland.co.uk

Thanks Mav, I'll have a look and get back to you later. Graham visit Carrotland.co.uk

Mav YHM, Graham visit Carrotland.co.uk

Looking for a pair DeDion fit 7 x 13 miniltes deDion fit for track use, any make or finished considered so long as they are straight and true. What do you have ? Graham visit Carrotland.co.uk

I talked to George Polley today and I think they quoted me £55.00 each plus VAT for 6x13 and £65 + VAT for 7x13 either silver or with black centres. Sorry left quote on desk...... it's safer there as SWMBO cannot find it 😬 Graham visit Carrotland.co.uk

Hi Sam, My 1700ss xflow had the following jetting if it helps..... 30mm Chokes 4.5 Aux Vent F16 Emulsion Tubes 120 mains 170 Air 45F9 Idle Hope that helps Cheers Graham visit Carrotland.co.uk

Martin YHM Graham visit Carrotland.co.uk

Martin, I'm running one of Ammo's 190/195 spec Zetecs on 45 Webers also with the intention of fitting TBs in due course. I think I have a note of the jetting somewhere ( or will pull the jets outs and look) and drop you a BM over the weekend. You won't regret the money spent with Ammo *thumbup* I have a 190/195 spec engine from him and it is superb 😬 Cheers Graham visit Carrotland.co.uk

Hi, I did this on my xflow a few years ago without any problems what soever, sorry very busy at mo as off on hols in a few hours but there are pictures here Cheers Graham visit Carrotland.co.uk Edited by - Graham Torbitt on 5 Aug 2006 12:29:51