Jump to content
Click here to contact our helpful office staff ×

millsn

Account Inactive
  • Posts

    1,918
  • Joined

  • Last visited

Everything posted by millsn

  1. you can get them on ebay, type in the usual stuff you can think of but start with granada seal kit as I think that's what they're listed under.
  2. millsn

    Dion Tube

    I'd give it a good going over witht POR15 and have done witht it. Nothing further required. Might be worth checking if you need a new bush in the tube, if it's comoing off the car the repaint will be far easier
  3. quick hijack for obns but you have mail on your site address
  4. which seats are those?
  5. I think a garage can easily check for hgf with a sniffer to test the coolant so might be worth looking at getting done
  6. later ones got something like 10-20mm longer but are interchangeable with the older variety (excepting the damper attachment issues creating by relocating the lower damper mounts).
  7. you need a balljoint splitter, avail Halfords etc here Edited by - millsn on 26 May 2008 16:33:46
  8. ps, don't forget to check that the heater valve is open when you do this
  9. I'd make every check i could that the system was fully bled of air. If you have a heater you can detach one of the hoses, hold it as high as possible stuff a funnel in the end and fill from there. This gives a good presure of water above the engine (something which cannot be said of the header tank itself). expect to see air glugging out of the funnel. When you remove the header tank cap you should expect the water to exit the tank as it fills from the funnel
  10. i've mounted the spherical one fwd of the tower between there and the rad. Very nice it looks too.
  11. yess, that's an E model..whattever one of those is, might be the same?
  12. anyone have the pin outs for an mbe 967?
  13. i can't get their site to display a centred footer. other thana that it's so nearly there. I'll email them. What I'm after is a dealer related line of text where the dealer in questrion has some relevance to sevening. My car was originally bought from SGT (which is good enough) for example. Thing is i thought you had to turn up with V5 in hand tot get new plates these days, this is what I had to do recently on our ford.
  14. I'm trying to get a replacement set of plates. I want some with some 7 related reference on lthough. Anyone know how you can order them say from Caterham? Am I correct in thinking that you have to physically present the V5 to obtain therefore you have to atttend the seller's location? I don't really want to travel far enough South to do this (even Caterham midlands is some way off) unless there's no other option.
  15. i reckon i've enough room for the same tank in front of the turrets. Crosses fingers..
  16. You must have spent some time picking out those letters with tippex eh Phil?
  17. Just looking at your site; how is your expansion tank now mounted? My new freestyle gear has necessitated a relocation of my tank whihch I'm about to do but I'm interested how you've done yours to see if therre's any learning there. Could you please advise?
  18. like a petticoat but supports more weight?
  19. does anyone have a linky to a pic for these lenses?
  20. (Jeez, I'm beginning to sound like Phil Waters wink smiley) there's a reputation for you!
  21. millsn

    expansion tank

    Called caterham and my descripion produced a distinct lack of joy. A pic and pt number would be really handy if at all possisble?
  22. millsn

    expansion tank

    Jason, have you seen any pics of the tank anywhere?
×
×
  • Create New...