Nick Pargiter
-
Posts
323 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Blatmaps
Speed Championship Results
News
Website Help
Downloads
Gallery
Store
Everything posted by Nick Pargiter
-
Might be interested but just need to check something on the car so can I have first refusal. Nick Mellow Yellow Vauxhall - I don't think so!!! 😬 😬
-
Bob I have a green leather dash panel going spare but won't be able to get hold of it until the end of next week. Nick Mellow Yellow Vauxhall - I don't think so!!!
-
After fitting one of the Radtec race rads I now have a standard Caterham Ali Rad going spare. Only 18 months old. £100 ono. It is in Sussex but can be taken to Bristol as I work there during the week. Mellow Yellow Vauxhall - I don't think so!!!
-
Just spotted on rallyusedparts.co.uk £400 with 2.01 first gear. This is not mine but thought someone might be interested. Mellow Yellow Vauxhall - I don't think so!!!
-
80 degrees is not that high, most cars have that as their normal running temp. If the fan is cutting in about this temp you have either got a fan switch with a low switching temp or your guage/sendor is U/S. What temp did the car run at before you noticed the problem? Mellow Yellow Vauxhall - I don't think so!!!
-
If you can find a set of second hand doors you can get them cut down to form half doors. Mellow Yellow Vauxhall - I don't think so!!!
-
Anthony Have you checked www.racecar.co.uk Seem to recall seeing a few for sale including one that had been ported with larger valves. It was about a month ago but if you do a search something should come up. Regards Nick Mellow Yellow Vauxhall - I don't think so!!!
-
Pinky YHM. This also pushes the add to the top. Somebody must be slightly interested in upgrading their HPC Nick Mellow Yellow Vauxhall - I don't think so!!!
-
To go with my injection upgrade. Nick Mellow Yellow Vauxhall - I don't think so!!!
-
Am looking for a set of these for an project I have been thinking about. Anyone got any that were going in the bin? Nick Mellow Yellow Vauxhall - I don't think so!!!
-
Ever wanted a bit more power from your standard injection Vauxhall without major expensive changes. How about a programmable chip and Ram-air filter. I have said upgrade for sale, ready mapped for a Vauxhall Caterham for a mere £230. Thats about half price and no need to mess around with rolling road sessions, it's already been done. Would work very well with a performance exhaust, giving about 15% improvement in both power and torque. Nick Mellow Yellow Vauxhall - I don't think so!!!
-
Rupe, YHM Regards Nick
-
Quote: "including a new bonnet wich is a VX one, with holes for carbs air filter" : unquote
-
Stephane To use the other bonnet you would need to change to carbs or throttle-bodies to get the JPE look. The standard system uses a Rover air filter housing fixed in front of the heater and breathing through a small hole down to the tunnel above the gearbox. If you are interested I also have a Ram-Air filter and pipe that was fitted to a VXi. When used with a Programmable chip( also available ) and a performance exhaust( not available ) I got a 15% increase in power and torque. The chip is already mapped for a Vx powered Caterham so would not need setting up. If interested e-mail me. Regards Nick
-
David Try checking with Westfield, they may have a different bellhousing to suit the T9 gearbox. I think they use the later MT75 gearbox now so the bellhousing may be for that. Alternatively give Phil Stewart a ring at Road and Race Transmissions on 01959 525105. He is very helpful and might be able to help you out. Nick
-
After various upgrades over the past couple of years, the following bits are surplus to requirements:- T9 gearbox - only done 28000 miles £150 86mm Acralite Flat Top Pistons £150 Pair of Black Willans 4-Point Harnesses (push button buckle) £60 Pipercross Ram-air filter and adapter pipe (fits standard injection system) £30 Superchips chip (with Ram-air filter gives Caterham quoted power!!) £200 Regards Nick
-
Phil, Speak to Caterham Parts, they have a restrictor that goes in the small pipe to the top of the header tank. It worked on a friend's car and he was having the same problem. Nick
-
Eddie, Thanks for the offer but have managed to get hold of some locally. Regards Nick
-
Ian Am interested in one of the engine stands, subject to price. Regards Nick
-
Has anyone got a pair of these that I can borrow or buy. Am based in Bristol and Sussex(at the weekend). Thanks Nick
-
Andy Are the tyres still for sale. I only need 2. Nick Edited by - nick pargiter on 9 Apr 2002 21:49:27
-
Windy, Am interested but would like to see a photograph. Can you e-mail me the photo? Also was it a one off or do they have nay more? Nick
-
Mike Ignition switch does need to be 40 amps. Starter circuit is usually 16 amps on its own. Suggest using switch on page 175 of DT's catalogue, item 3, with a starter button. Nick
-
Had similar problem after a complete rebuild over the winter.Left the Vecta in with the ignition on and went away for a cup of coffee. When we came back all was OK. We might have been lucky but it is probably worth a try.
-
Why not put some of your stuff on the lorry, saves carrying all that excess weight in the car, makes for a quicker journey down!! Nick
