Jump to content
Click here to contact our helpful office staff ×

Englishmaninwales

Member
 View Profile  See their activity

  • Posts

    3,543

  • Joined

  • Last visited

  • Days Won

    2

 Content Type 

Everything posted by Englishmaninwales

  1. Englishmaninwales
  2. Englishmaninwales
    What is the current K series head gasket to use and where from?(not for me, I hasten to add!) Malcolm
  3. Englishmaninwales
    You were missing the best bit of your 1400 SS Edited by - Englishmaninwales on 27 Mar 2008 00:06:18
  4. Englishmaninwales
    Steve BGH provide alternative gear ratios for the 5 speed, on exchange. Various ratio sets are available with a long 1st e.g. 2.66 1.75 1.26 1.0 0.84. For the effort in changing, I'd keep the 4 speed. Malcolm
  5. Englishmaninwales
    yes
  6. Englishmaninwales
    Ive just been able to get a g/b nose extension 2nd hand from Road and Race complete with new oil seal fro £30. Try them, half way down thread here
  7. Englishmaninwales
    Being in the passenger seat will have upset Richard's corner weights, but at least I know it was heavier on his side of the car 😳
  8. Englishmaninwales
    Rob What is pad knock off? Malcolm
  9. Englishmaninwales
    Well done! Makes a big difference to performance. I just have to get used to having my 1400 back in the car for a year 😳. Call it downgradeitis Malcolm
  10. Englishmaninwales
    David, I think that had a ported 'head. Malcolm
  11. Englishmaninwales
    LJV I bet he'll refuse local pickup as he's using inflated shipping prices to boost his profit. I've had this problem before! ☹️ Malcolm
  12. Englishmaninwales
    Not going to Goodwood, but not on the distribution list. No action needed Mark Malcolm
  13. Englishmaninwales
    *thumbup*one XL and one S; I have emailed Emily Malcolm
  14. Englishmaninwales
    Mark Sorry I can't help, my car is still in bits all over the garage floor ☹️
  15. Englishmaninwales
    Paul Richard's suggestion is a good one. Judith bought a brand new Nomex suit on eBay for £50 Malcolm
  16. Englishmaninwales
    Stu I 'd thought you've got enough VHPD engines in that garage of yours 😳 Miff, If you split the engine I would be interested in the crank. Malcolm
  17. Englishmaninwales
    Nick Glad you' ve got it sorted at last. Those North Wales roads are still empty..... 😬 Malcolm
  18. Englishmaninwales
    Too much viagra on this thtread..... 😳 😳
  19. Englishmaninwales
    watchout Mr Windycat, it's slippery 😳
  20. Englishmaninwales
    Must remember not to post when coming back in from the pub............
  21. Englishmaninwales
    Steve Yes it does matter, as you can end up with the timing 180 degrees out. Look at the diagram here scroll down to ''Fitting Verniers'' it shows the standard timing wheels in their correct position at 90 BTDC. Not quite sure what Myles is on about Malcolm
  22. Englishmaninwales
    Explains why RP didnt reply to a mid afteroon text '' hav u slid off yet?'
  23. Englishmaninwales
    Dreamer Blat mail me your snailmail address and I'll send you a CD
  24. Englishmaninwales
    Wheely I think Re720 may still be available in 185 60 14, should you wish to continue with 14" rims. I use these for touring and general road use giving slightly longer gearing, and I replaced one (sidewall puncture) last September. I think I got it from BMTR here. Malcolm
  25. Englishmaninwales
    Two forms went in the post yesterday
×
×
  • Create New...