Jump to content
Click here to contact our helpful office staff ×

Jonathan Kay

Member
  • Posts

    41,461
  • Joined

  • Last visited

  • Days Won

    20

Everything posted by Jonathan Kay

  1. Abingdon Air Show: http://www.abingdonfayre.com/the-show.php Jonathan Edited by - Jonathan Kay on 8 May 2011 22:05:41
  2. Two ? replica Spitfires flying SE over Oxfordshire at lunchtime. What were they? Jonathan
  3. "Show all topics" is showing on the pull-down menu when I click "Aggregated" as the last action before the 500 error. Jonathan
  4. Me too, unless I delete my cookies first. Jonathan
  5. Can anyone recommend a bracket/ tray suitable for a PVR25 that is a lot cheaper than £33? Thanks Jonathan
  6. Thanks for the suggestions. They are too loose without the crinkle washers. The anchor plates are 3.98mm thick. Does anyone know a source for the top hat washers so that I can try and find some with a longer thin bit? Thanks Jonathan
  7. Merlin? 37 litre Griffon! Jonathan
  8. Thanks everybody. I took it to James Whiting: http://www.jameswhiting.com/ Highly recommended Jonathan
  9. Thanks Nick, and others. Question to answer in 6 minutes! That's how I have them but the step on the washers isn't deep enough for the plates on my new harness. More soon... Jonathan
  10. What's the correct way to assemble the plain, crinkle and shoulder washers and anchor plate on the bolt so that the plate can swivel freely? Thanks Jonathan
  11. I got www.towbarexpress.co.uk to fit one at home. Recommended. Jonathan
  12. Thanks for that. I wasn't clear... both of those had a similar lever. It was access to the lever that was the problem. Jonathan
  13. Yes. Members of my family have had the problem with an Eos and an S-type. On both of those it's officially a dealer job! On the Eos we did it but it was very awkward. On the Jag we ended up shining the lights on the garage door and applying sticky tape on the outside. Does anyone have any insight into why these aren't designed to be easy to switch? Jonathan
  14. Same problem. Safari. OS X 10.6.6. Deleting cookies always makes it work again. Jonathan
  15. Try: Autoparts Thame 100 High St Thame OX9 3EH 0184421 3416 Jonathan
  16. I've just read the cam belt thread and obviously need to change mine. 1.8 K in South Oxfordshire. I don't think I'll do this myself, Can anyone recommend a mechanic nearby? Thanks Jonathan
  17. I get 500 errors nearly every time I browse from the front page to a particular forum. If I remove my cookies it then works fine. Jonathan
  18. Jonathan Kay

    Harness

    I need to replace my passenger harness because of a frayed strap. 4 point for road use and occasional trackdays. I'd like the waist straps to tighten by pulling away from the buckle instead of up from the fixture. Any suggestions about suppliers and options? Thanks Jonathan
  19. Last year I bought a set from Classic Silicone Hoses and was very pleased with the quality and helpfulness. http://www.classicsiliconehoses.com/ Jonathan
  20. Is one of these the same stuff? http://www.infowiz.co.uk/olshop.htm http://www.amazon.co.uk/Onedrywash-Car-Cleaning-Kit-Waterless/dp/B000ZOX6O8 Jonathan
  21. Haskell's book says that Chapman invented this for the Mk 25. Jonathan
  22. Thanks for the advice. Does anyone have experience of Luke "aero adjusters"? Jonathan
  23. Thanks. They were made by Luke. I found a contact email address of: sales@corbeau-seats.com... ... unless anyone knows better.. Jonathan
  24. I have factory supplied 4 point yellow seat belts. One of the shoulder straps is frayed. Does anyone know a supplier of single straps, or someone who could make a new one with my fittings? Thanks Jonathan
×
×
  • Create New...