Jump to content
Click here if you are having website access problems ×

Jonathan Kay

Member
 View Profile  See their activity

  • Posts

    40,915

  • Joined

  • Last visited

  • Days Won

    16

 Content Type 

Everything posted by Jonathan Kay

  1. Jonathan Kay
    :-) but you might need to explain that to those from other parts of the British Isles... Jonathan
  2. Jonathan Kay
    It sounds more like a wiring problem than the switch being unable to supply the extra current. I'd check the wiring and then either: * Measure the voltage at the old brake lights as you close the brake lights, or * Temporarily fit the LEDs directly to the switch and earth and retest Jonathan
  3. Jonathan Kay
    Yes, a double-barrelled Michelin. Jonathan
  4. Jonathan Kay
    Do you have the wiring diagram for your car? Do you know how to read the wire colours from it? Do you have a multimeter (lots of discussions in the archives)? Once those are all set to "Yes" you could buy the relevant Haynes Manual, but you'll probably be fine just checking with BC as you go. A prewired kit for the high-level brake light is available. Jonathan
  5. Jonathan Kay
    Andy: Could you face refitting the LEDs on one side and taking some photos that compare them? Thanks Jonathan
  6. Jonathan Kay
    Thanks Jonathan
  7. Jonathan Kay
    Thanks Andy. Could you tell us the model you had fitted? Thanks Jonathan
  8. Jonathan Kay
    Quoting Stationary M25 Traveller: Never heard those before !!Double contextual self-reference: excellent. Jonathan
  9. Jonathan Kay
    *arrowup* *arrowup*Could you explain that, please, Lee. Thanks Jonathan
  10. Jonathan Kay
    Were you relying on the earth from the original battery while you jumped it? Jonathan
  11. Jonathan Kay
    SBD Motorsport say: SUMP BOLTS 243 LOCTITE ALLOY SUMP – 18LB/FT DRY SUMP------18LB/FT Jonathan
  12. Jonathan Kay
    Sigma and Duratec: Bell-housing to sump 20Nm Sump to block: Doesn't seem to be in the Assembly Guide or the Handbook. Jonathan
  13. Jonathan Kay
    Which engine? Jonathan
  14. Jonathan Kay
    I know it's clonking now, and that there are marks on both the spring and panel, but are you sure that they are fouling now and not at some time in the past when the configuration was different? Could you put a piece of masking tape on the panel and confirm that it gets marked? Jonathan
  15. Jonathan Kay
    How many shades of grey are there... oh! Jonathan
  16. Jonathan Kay
    Which language or frameworks would be of interest? Python RSS Libraries Jonathan
  17. Jonathan Kay
    Buy or build? Jonathan
  18. Jonathan Kay
    That's how I read it: surprising. Jonathan
  19. Jonathan Kay
    Well done. MOT Inspection: Manual here. Section 1.3 says a coloured tag on the switch is acceptable! Jonathan
  20. Jonathan Kay
    I think your diagnosis is probably right. Photos please: should take BC about 30 min to spot the model. Have you had a good look at the door seals and how well the door fits? Jonathan
  21. Jonathan Kay
    Any progress? Jonathan
  22. Jonathan Kay
    Have you changed anything recently? Jonathan
  23. Jonathan Kay
    Halfords are still offering thermostats on the web site... and say that some are in my local store... ? Jonathan
  24. Jonathan Kay
    Can you beat the system at Halfords by doing the cross-referencing yourself and reserving one online for collection? Jonathan
  25. Jonathan Kay
    What a mess. I'm surprised by what Halfords did. What's the reference number? Jonathan
×
×
  • Create New...