Jump to content
Click here if you are having website access problems ×

Jonathan Kay

Member
 View Profile  See their activity

  • Posts

    40,915

  • Joined

  • Last visited

  • Days Won

    16

 Content Type 

Everything posted by Jonathan Kay

  1. Jonathan Kay
    Well done. Dave's is a K&N RE-0910. That's a K&N RE-0810... for when that link expires! Jonathan
  2. Jonathan Kay
    I'd start with the easy bits: • Check the prop shaft joints and bolts. • And the bushes and play on the A frame in the rear suspension. Have you found your local group? That should provide access to some expert ears. : - ) Jonathan PS: If you'd like a copy of the appropriate Assembly Guide and Owner's Handbook then please send me a Private Message with your email address.
  3. Jonathan Kay
    "What do you mean "holes sleeved with tube"? and "flex", what flex? These questions as I am about to commit, but still have time to modify things." IIUC you've created a shallow box section. That can fail by the box crushing or warping. It can be made much more resistant by adding pillars between opposing faces. Tubes are a convenient way of doing that. Corrections welcome. Jonathan
  4. Jonathan Kay
    What Nick says. (Except that I don't have a Porsche!) Using a big dumb charger is potentially different. Jonathan
  5. Jonathan Kay
    "I obtained my latches from a company called Protex - I assume they still exist as they were/are a large supplier to the engineering industry. They also fit the original mounting holes (well, at least mine did!)" IIRC the last time we couldn't find any that did. Well done. Which model, please? https://protex.com Thanks Jonathan
  6. Jonathan Kay
    What foam or rubber do you have between the surfaces? There's some discussion in the archives of better latches, and possibly of fettling. Jonathan
  7. Jonathan Kay

    Wheel nuts

    Jonathan Kay replied to jody391's topic in TechTalk

    "I think you'll find CC now recommend 85Nm." Thanks. Yes, that's what's in the current Assembly Guide. Jonathan
  8. Jonathan Kay

    Wheel nuts

    Jonathan Kay replied to jody391's topic in TechTalk

    "also whilst on the wheel but topic, torque settings at 75nm seems really low!" Yes, 75 Nm. And the low value has been questioned before. : - ) Jonathan
  9. Jonathan Kay
    Start here. and please let us know if it isn't there. Jonathan PS: https://duckduckgo.com/?q=site:caterhamlotus7.club+power+supply+boot
  10. Jonathan Kay

    Wheel nuts

    Jonathan Kay replied to jody391's topic in TechTalk

    Which wheels and axle? Please add a photo if you aren't sure what they're called. Full search of the archives, but I'll narrow that down when we know the wheels. Discussion of required length. Jonathan
  11. Jonathan Kay
    "The holes from the old ones can then be patched with some silicone / gorilla tape etc." How about removing the inner part to protect the paint but gluing the outer part back on the door? Might look neater. Jonathan
  12. Jonathan Kay
    How to contact Rob. Jonathan
  13. Jonathan Kay
    John Vine on CRBs and cable-operated clutches. Jonathan
  14. Jonathan Kay
    Thankyou Jonathan
  15. Jonathan Kay
    Thanks Jonathan
  16. Jonathan Kay
    "RatRace are listed as 'permanently closed' on Google, and that number is invalid - shame, cause as you say, they are really pretty close by." Just to be sure: that's using the Barnet details in my second post? Thanks Jonathan
  17. Jonathan Kay
    Thankyou for the correction. (That linked page has Potters Bar.) Ratrace Ltd. Car Accessories And Parts in Barnet 174 High Street, Barnet, Hertfordshire, EN5 5XP 01707 645 040 Even closer to Golders Green! : - ) Jonathan
  18. Jonathan Kay
    Ratrace in Potters Bar might have a suitable clutch cable. Jonathan
  19. Jonathan Kay
    The pin outs for the ECU are in the engine harness diagram. Do you have all of the diagrams? If not please send me a Private Message with your email address. Jonathan
  20. Jonathan Kay
    "The wiring diagram in #49 suggests brown/black and green/blue." As on this other Sigma. Jonathan
  21. Jonathan Kay
    Thanks, that's very helpful. Looks like Green/Blue and Brown/Black. As in the diagram. Jonathan
  22. Jonathan Kay
    W33SVN wrote: " ... found a wiring diagram that confirmed one sender only." Please could you tell us the wiring colours that run to that sender on your Sigma. Another Member needs some help. Thanks Jonathan
  23. Jonathan Kay
    Where is that sender? And do you have one or two water temperature senders? Thanks Jonathan
  24. Jonathan Kay
    Thanks for adding the answer. Jonathan
  25. Jonathan Kay
    "Anyways, my issues remains, and thats after buying a brand new Gauge form Chris @ Redline...Grrrr...." "So, Im now assuming mnaybe earth fault...does anyone know which of the 3 wires on the back are the earth please ?" Is that about the connections to the gauge? What colours are the wires? Jonathan
×
×
  • Create New...