Jump to content
Click here if you are having website access problems ×

Jonathan Kay

Member
 View Profile  See their activity

  • Posts

    40,929

  • Joined

  • Last visited

  • Days Won

    16

 Content Type 

Everything posted by Jonathan Kay

  1. Jonathan Kay
    Yes. I'd start by seeing what the gauge shows when the connection to the sensor is open circuit and short circuit. And measuring the resistance across the disconnected sensor when the engine is cold and hot. Jonathan PS: There seem to be a lot more reports of 7s not getting up to expected temperature than used to be the case...
  2. Jonathan Kay
    The reading goes up and down sensibly and consistently... but seems too low? The complication being the car has JPE yellow faced dials... I'm not familiar with those... are they analogue dials? Can you add a photo? Jonathan PS: Sensors need to match gauges, but most sensors seem to be available, and if not there may be a bit of resistance trickery that would help. Internal faults in analogue dials can probably be rectified by eg John Ostick.
  3. Jonathan Kay
    What failed... that link or sales@pipercams.co.uk as an email address? Jonathan
  4. Jonathan Kay
    There was one on the old blatchat site - not sure if the checklist migrated over?? Is that Shaun's schedule or something else? Service Schedule list is also available in the Owners Handbook, which can be downloaded from the CC website as a PDF. I have many (? all) of the old versions of the Assembly Guides and Handbooks: just ask. Jonathan
  5. Jonathan Kay
    sales@pipercams.co.uk Jonathan
  6. Jonathan Kay
    Nearest in the equipment register are Weybridge and Gosport. Everyone's recommending using a balance beam nowadays. Jonathan
  7. Jonathan Kay
    Previous suggestions. Jonathan
  8. Jonathan Kay
    Thanks. That led me to these. Jonathan
  9. Jonathan Kay
    Is it urgent? You can make one from bits, and I've got a spare in Garsington. Jonathan
  10. Jonathan Kay
    Hi folks, bedt you go to classic car leds in Bristol. Find them on the web. Look for the headlight bulbs h4 Led ones. Listed under the caterham section. Been using for 6 months. Best money i ever spent. Which ones did you buy, please? Thanks Jonathan
  11. Jonathan Kay
    Have you tried dosing the bolt with lots of WD40 and leaving to soak so that it penetrates down into the thread (not easy with the wing in place). Then using a a mole wrench try to pull the bolt head outward whist turning anti clockwise. You will need to push the skin around the rivnut inward at the same time to encourage some compression bite. An extra pair of hands might just bring some luck. I was wondering about getting some bite by angling. But ordinary WD-40 isn't a very good penetrating oil: how about PlusGas or similar? Jonathan
  12. Jonathan Kay
    These are really nice pieces, but we can't get them into our kitchen. They're in South Oxfordshire. Who's next? Jonathan
  13. Jonathan Kay
    Thanks for all that work and including the detail: it still looks as if the products haven't settled down. Jonathan PS: The start of the first URL is duff. PPS: " If there were no other road users... " :-)
  14. Jonathan Kay

    Coil Pack

    Jonathan Kay replied to SPW's topic in TechTalk

    Can't find it in the archives, try Redline? Jonathan
  15. Jonathan Kay
    Possibly a 2w Econoseal... get the right sex. No known improvements to the wiring.Jonathan
  16. Jonathan Kay
    Not sure if it’s possible to buy and fir the OE standard connector for the loom? Have you got a link or photo for the new sensor? John: Are there any relevant wiring improvements for the gearbox sensor? Jonathan
  17. Jonathan Kay
    Let us know when you've identified the current system (mechanical from the gearbox, electronic from the wheel, electronic from the gearbox, something else) and what you'd like to end up with. There are some recommended modifications to the wiring. Jonathan
  18. Jonathan Kay
    2.5" x 0.5" UNF caphead bolt on my 1998 de Dion and in Shaun's Bolt List. Jonathan
  19. Jonathan Kay
    Burton Power now sell a 90° adaptor that might be stronger than the original and an electronic adaptor. Jonathan
  20. Jonathan Kay
    I'll try and work out how to post a pic on here. Uploading them here or linking to them somewhere else? Forum User Guide. Jonathan
  21. Jonathan Kay
    Private Mail sent. Jonathan
  22. Jonathan Kay
    Recent discussion, including removal and a report of fracture. Jonathan
  23. Jonathan Kay
    ... but the search function is still clearly beyond me... K & N Barnby​​(wheelweights.net seems to be down.) Jonathan
  24. Jonathan Kay
    Hazard warning lights working? Hazard warning light switch cycled a few times? Jonathan PS: I'd save time and go straight for either the meter or for jumping good test feeds and earths until you find the jump that makes them work.
  25. Jonathan Kay
    If you want a Banner most people recommend me. Tanya
×
×
  • Create New...