Jump to content
Click here if you are having website access problems ×

Jonathan Kay

Member
 View Profile  See their activity

  • Posts

    40,929

  • Joined

  • Last visited

  • Days Won

    16

 Content Type 

Everything posted by Jonathan Kay

  1. Jonathan Kay
    Matt: Did you spot #32... that might have crossed with your #33. Jonathan
  2. Jonathan Kay
    I used Sikaflex 521. I can't find a reference to Sikaflex 521 in the archives. But there's a lot on other types. The manufacturer describes 521 as an "Excellent adherent, weathering resistant sealant", not as an adhesive. (And notes the slower curing time at lower temperature and "The optimum temperature for substrate and sealant is between 15°C and 25°C.") Jonathan
  3. Jonathan Kay
    Thanks I'd recommend the full sausage roll. Both surfaces were sanded to make a roughish surface. Did you remove the paint or powdercoat from the metal stay? And can you tell at which layer it failed? Jonathan
  4. Jonathan Kay
    Worst thing was though, the bloody cycle wing fell off! I attached using Sikaflex, and gave it 72 hours to dry, but for some reason it just hasn't bonded. How did you prepare the surfaces? Which Sikaflex product? Did you make a sausage roll or only a sandwich? How cold was it?Jonathan
  5. Jonathan Kay
    Thanks Jonathan
  6. Jonathan Kay
    Is it the same in initial posts and replies? Jonathan
  7. Jonathan Kay
    :-) Thanks Jonathan
  8. Jonathan Kay
    Developing discussion of CAN bus on 7s. Jonathan
  9. Jonathan Kay
    ... does this gauge take an analog input for temp senders or has that signal been digitised in an ecu first? I don't know if they have changed any of the senders, but the signal goes to a CAN controller. Jonathan
  10. Jonathan Kay
    Sounds as if we need: The CAN bus IDs etc that Caterham are you using. Someone to recommend a monitor/ analyser. A photograph of those gauges to make it easy to spot them. To discover if different senders are used on Can Bus 7s.Jonathan PS: CAN bus, from Wikipedia.
  11. Jonathan Kay
    :-) If you click the second link in my tagline it sets up a new search where you can add your own terms, filters etc. Jonathan
  12. Jonathan Kay
    What colour are the wires? Jonathan
  13. Jonathan Kay
    I'd take a photo of the gauge and ask Caerbont. Jonathan
  14. Jonathan Kay
    You can get 'em stripped, treated and powder coated in any finish you want for £20 ea. at City Wheel Refurbishment in Brum. They do a great job-not worth doing 'em yourself!. When was that, please, Paul? A few years ago there were both plaudits and brickbats... it would be good to know that they're now reliable. Thanks Jonathan
  15. Jonathan Kay
    Thanks Jonathan
  16. Jonathan Kay
    Have you got the wiring diagram from the Assembly Guide? I think that the new style has the layout. Let me know if you want a copy. Jonathan
  17. Jonathan Kay
    Thanks. Jonathan
  18. Jonathan Kay
    Thanks. When investigating the WWW they advised fitting a CAN bus to help pull the right load as LEDs pull a lot less - that can solve flickering - and it did - but just for one of them Does a 310R have either CAN bus or pulse width modulation on the lighting supply? Jonathan
  19. Jonathan Kay
    Previous observed values and discussion. Jonathan
  20. Jonathan Kay
    Did you find anything interesting on the electrical leads? Jonathan
  21. Jonathan Kay
    I can't see the photos in #5 (Safari, macOS). Ed obviously could... Jonathan
  22. Jonathan Kay
    That's good to know, thanks. Does the Club discount cover renovations and alterations? Jonathan
  23. Jonathan Kay
    ... and found crystals all over the cap and the fluid looking very cloudy. Was it very cold? Thanks Jonathan
  24. Jonathan Kay
    I still reckon 3y on the shelf and 2y in the 7 would be well within tolerance... What did you do, John, please? Jonathan
  25. Jonathan Kay
    Please could we have the definitive recipe while it's fresh in your mind? Thanks Jonathan
×
×
  • Create New...