Jump to content
Click here to contact our helpful office staff ×

jackb_ms

Member
  • Posts

    4,189
  • Joined

  • Last visited

Everything posted by jackb_ms

  1. Hello All I need to check the capacity of a lithium ion battery I have. Can someone recommend a good quality capacity tester? Cheers Jack
  2. Hi Jonathan thank you for your kind the offer, I have a Easy bleed kit Cheers Jack
  3. Hello All I'm going to change the brake fluid. Is there a guide on how much is required to flush the system? Cheers Jack
  4. i go to Nottingham from Oxford every Monday and drive Citroen C5 if you can get them to me, i can take them to Nottingham Jack
  5. Hello I also do have anything to block the hole. I was thinking of using something like a draft excluder to do the job. Something like http://www.screwfix.com/p/stormguard-garage-seal-aluminium-2-5m/29327 Jack
  6. Martin I have PRRT fitted to my 21. You are welcome to have a look how it fits if you want Jack
  7. No Sorry. When I do an oil change, I run the engine until the oil pressure drop to 2 bars, which should indicate the engine is nice and warm. I then more or less empty the oil straight away so the oil doesn't have time to drain back to to the sump. Jack
  8. When I do an oil change i get the best part of 5-6 ltr of oil out of the systems. So those quantities seems ok. I use a suction pump to take the oil out from the bell housing tank Jack
  9. I didn't adjust the rack I've call Redline in the morning and Mike advise against trying to adjust the rack. Maybe it was a case of "if in doubt read the manual" Jack
  10. Hello All Well tonight I printed the two pages of the build manual for the 21 and decided to undo nd all concerning the steering and start again. And after fitting everything back as per the manual the play is gone! So I'm happy that the issue is solved, but very puzzle has where was the issue. Jack
  11. Hello Thank you for the explanation Tony My helper was my 8 year old daughter who wiggle the steering wheel when I was looking at what was happening. I will call Redline this morning and see what they say. Jack
  12. My next step would have been to call Redline for information "adjustment" on the rack and search the archive of Blatchat. What does the "preload" screew do? Will i need to turn it clockwise or anticlockwise? Jack
  13. Hello all I had a little helpier this evening and the play is back at the rack. The upper and lower column as well as the UK move in unison. So or I have a faulty new steering rack or the play news to be taken out from it. Jack
  14. The steering wheel is not on a removable one on a quick release Jack
  15. On the 21 there are quite a few item in the way and I also have a set of RB THB hiding the clamp! It's not really an issue with an MOT failure, it's more about feel as nothing for the first five(ish) degrees of movement of the steering wheel in both direction Jack
  16. The rack was bought complete from Redline and was fitted yesterday. Jack
  17. The symptoms are the same before and after changing the rack. The grub screw was not in the clamp. It is such a simple system, the steering wheel is connected to the upper column which in turn is connected to the lower columns via the clamp which is connected to the universal joint which I could not feel any play in. I'm puzzled by this issue. I wonder if the grub screw could be at fault. I think I need someone who could look at the steering columns when the steering wheel is turning. Jack
  18. Hello All I am having some difficulties eliminating play in the steering of my 21. I have replaced the rack and there is still some play. The issue is in the first five(ish) degrees of movement of the steering wheel in both direction nothing happen then the front wheel start to turn. The rack is new so I will assume there is no play in it. What is left is the link between the upper or lower columns, so the play must be coming from there. I have tightens the two bolts of the clamp then the grub screw and then the locking nut. Every thing is "FT"! So what I am doing wrong / not correct? Which bit did I overlooked? Jack
  19. Hello All I have a new steering rack which I need to fit on the 21. Is there any pitfall I need to be wary about? Any advice would be welcomed Cheers
  20. Hello I went from remote sensor to capillary gauge with warning switch. I much prefer the capillary gauge with warning switch. I still have the hose and sensor for the electrical gauge if you are interested. (As well as a T piece, but no switch.) Jack
  21. Hello I have a AP clutch parts Send me you address and I will send pictures Jack
  22. Hello Nick You have a PM jack
  23. Hello All I have searched in the guide but cannot find the information i am looking for. The 21 is going to have its tracking checked, toe, castor etc. Is there a guide or a list of value available which I can give to the company which is going to do it? Cheers Jack
×
×
  • Create New...