jackb_ms
-
Posts
4,189 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Blatmaps
Speed Championship Results
News
Website Help
Downloads
Gallery
Store
Everything posted by jackb_ms
-
Did you have a look at that: http://www.blatchat.com/t.asp?Id=121617 Jack Emily, The Very Yellow 21
-
☹️not even a camera phone? Don't worry, I'll pass on them Jack Emily, The Very Yellow 21 Edited by - jackb_ms on 15 Dec 2006 12:09:57
-
Pictures? might interested if it fit the CC roller barrels Jack Emily, The Very Yellow 21 Edited by - jackb_ms on 15 Dec 2006 11:40:13
-
Cheers Mav I haven't located those little bolts. I will have another look at the tomorow Thanks again Jack Edited by - jackb_ms on 10 Dec 2006 20:36:55
-
they are the one of an Exige Jack Emily, The Very Yellow 21
-
Hello I've been trying to remove the trumpets on my set of DTH TB. They turn but they don't seemed to be remove from the trottle bodies. Any ideas on how to remove them? Cheers Jack Emily, The Very Yellow 21
-
Cheers Tom I don't have the ported head so I should get a bit less. I do agree with you, I will not feel comfortable going over 190bhp with the standard pistons ( maybe someone will contardict us?) Jack Emily, The Very Yellow 21
-
Tom Sorry for the hi-jack 😳 What kind of power output are you expecting? I am going to do something similar on my 21 Jack Emily, The Very Yellow 21
-
Hello I have a set of PTP TDH TB and before fitting them I would like to give them a clean, to make them like new. What is the best way of cleaning them? Once through the dishwasher? Cheers Jack Emily, The Very Yellow 21
-
I looking into fiiting some throttles bodies to my EU2 VVC I have read that the Emerald has now a self mapping function and the to worked it needs a wide band lambda sensor Which is the best one to connect to an Emerald to use the self mapping function? Do you think I will need still have to have the engine mapped if I use the self mapping function? Jack Emily, The Very Yellow 21
-
thank you 😬 I'll e-mail Emerald and ask what the cost involved in doing so Cheers Jack Emily, The Very Yellow 21
-
Rob I have read your post, and like Malcom I will wait for the outcome of the sale of the engine. And yes, there are a few VVC which are control by an Emerald Jack Emily, The Very Yellow 21
-
Rob How old is the Emerald? Do you know if it is the kind which can drive a VVC? If yes can I have it? Jack Emily, The Very Yellow 21
-
I'm looking for some info of the BS regarding the type of cables used in cars. I have quite a lot hight quality 0.75mm cable which I would like to know if I can use. Jack Emily, The Very Yellow 21
-
would want it to be enameled or powered coating after Jack Emily, The Very Yellow 21
-
Hi Thinking of having the suspension part shot blasted and re powered coated this winter. I was speaking to a gentleman about molten zinc spraying as a method of protecting against rust. What our your thought about this method? Jack Emily, The Very Yellow 21
-
Hi I'm looking for a set of roller barrels TB. I have a set of DTH TB to exchange plus cash to someone who wants more drivable car. Cheers Jack Emily, The Very Yellow 21
-
The cost involed would be your time and a biggish capacitor. A 3 phase motor has 3 coils and they should connected to 6 terminal on the motor (2 per coil) You need to find this box before going further. I have a PDF file with some theoretical diagram which I can send you if you blatmail me. Cheers Jack Emily, The Very Yellow 21
-
Brucey You can convert 3 phase into single phase. Jack Emily, The Very Yellow 21
-
I was planning of keeping the OEM ECU for my version of the VVC-R I wanted to check that the map for the roller barrels TB will be compatible, and the answer is no. Thanks a lot Jack PS: does someone got some roller barrels which they are not using? Emily, The Very Yellow 21
-
Thank you gentlemen for all that My thoughts are as follow: Roller barrel flows about the same as DTH TB. So logically a ECU which was programmed for a roller barrel should work with DTH TB. Yes or No? I believe it will be no, I just don't really understand why, just a kind a gut feeling type of thing. This is why I am looking for some data showing how the air flow goes trough a roller barrel and a DTH TB Cheer Jack PS: I want to use my car a lot more on the road than on track. Emily, The Very Yellow 21
-
Emily, The Very Yellow 21
-
I might be wrong but I believe the 160 had the 1.8VVC unit Jack Emily, The Very Yellow 21
-
Hi I'm looking for some data about the air flow for the Jenvey DTH TB and the CC roller barrels My search on the interweb, have not be very fruitful. Can someone help? Cheers Jack Emily, The Very Yellow 21
-
Hello! Have you tried them? http://www.vehicle-wiring-products.co.uk/VWPweb2000/battisol/battisol.html I use the second one Jack Emily, The Very Yellow 21
