jackb_ms
-
Posts
4,189 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Blatmaps
Speed Championship Results
News
Website Help
Downloads
Gallery
Store
Everything posted by jackb_ms
-
Hello If I don't have them I cannot use the roll bar, is that what you are saying? ☹️ Could you e-mail me your telephone number please? Jack Edited by - jackb_ms on 2 Jul 2012 14:07:40
-
I'm just checking with people with more knowledge if it would fit a 21 Jack
-
I don't have this plate... Just two holes in the chassis in front of the back wheels. Does that mean I fon't fit? Jack
-
Can I have the springs please? would be an issue to pickup though. I can arrange a DHl pickup or if you are going to Silverstone classic Jack
-
i'm interested also if it fits an S3 chassis imperial Jack
-
Hello I have those if interesred CC part number 77516 4 of Jack
-
You need motorbike spring compressor then you can do it on the car. It's what I use for my 21 Jack
-
HEllo I'm interested in the oil pump, I need to check what is required to upgrade from the purple to the gold. (do you know) Kind regards Jack
-
it's an old one...
-
hello Do you know if they would fit rear bilstein units? Jack
-
Hello Shad Any Ideas if they would fir a 21? and the spring rate?
-
Caterham M1 race dampers - Bilstein/Eibach 250/215 - nearly new
jackb_ms replied to pebblebuoys's topic in For Sale
Jon if they are still available would it be possible to have the spring only? Jack -
lard 😳 What are you saying.... the dampers are 6-7 years old and not leaking. they are the standard Bilstein with adjustable platforms. the bottoming happen mainly when the fuel tank is full or i have have a passenger, so their is weight involve in the issue. I was thinking of buying those here or those here but i am not sure what would be the implication with regards to the front axle setup. I'm thinking also to add a rear anti roll bar Jack
-
Is it a good thing for a road going 7 / 21? I am working on sorting out the handling / suspension of my car. It has a tendency to bottom up at the back which should be resolved by fitting stronger rear spring ( I have adjusted the height already) I was pondering if I should invest in a Watt linkage and a roller bar at the same time. What is the view of BC on Watt linkage, useful or not on a road going car? Jack Edited by - jackb_ms on 1 Jun 2012 15:31:08
-
me too
-
I may be interested... I need to talk to my wife Jack
-
The thread is damaged as you can feel it slipping. I will try the oring trick see if thatb helps
-
Hello I have a niggling issue with my car, the spark plug cover vibrates which create a irritating metallic noise. It vibrates because it seems in the past I was heavy handed and damaged the thread for the cap head screw. There is not a lot of material to create a new thread so I was thinking of using some chemical metal, filled the hole back and then drill and tap. or buying a bit of stud gluing the stud in and used nuts to hold the cover in place. Good or bad idea? Or buy a new cam cover, but I don't now how easy or difficult it is to change. Jack
-
Supercharging 😬 I'm thinking of doing it through the RB THB I have on my VVC Jack
-
When I bought my helmet I went to a motorbike shop where they had the largest range of helmet. I bought an ARAI something which was is very nice Jack
-
Hello I am a bit confused on what should be the setting for my car a 21 which is used mostly on the road. I have made some searches and it seems the ideal toe in is 0 for the front but i have no idea what it should be for the rear. What about castor and camber for the front and real axle? thanks for the help Jack Edited by - jackb_ms on 31 Mar 2012 23:33:14
-
Has a temporary fix you can buy this self almagating tape which may work. Jack
-
the swimsuit for up to what age?
-
Would it fit a VVC engine? Jack
