jackb_ms
-
Posts
4,189 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Blatmaps
Speed Championship Results
News
Website Help
Downloads
Gallery
Store
Everything posted by jackb_ms
-
Hello All Our trusted Toyota Hilux needs to find a new home. It's a single cab 2.5 D4D engine 2WD 2 Batteries changed last year MOT until 15/11/13 Tax until 30/11/13 About 88k on the clock It's a commercial vehicle so there is VAT cost inc VAT £2400 Cheers Jack Edited by - jackb_ms on 20 Sep 2013 08:51:36 Edited by - jackb_ms on 20 Sep 2013 08:52:07
-
One for the experts - Chessman exhaust UPDATE after RR
jackb_ms replied to Supersprint1988's topic in TechTalk
I think a 21 was fitted with one jack -
And the problem was the crankshaft speed sensor wires was too close the spark plug leads. Sorted this up with Carl's help at Emerald Everything seems fine now Jack
-
any ideas of cost yet? Jack
-
that would have been a car I would have had but it's manual 😔 jack
-
I have a short cat from my 21 if tyou want It was made by Cheesman Jack
-
Called Mick and they don't have any ☹️ Jack
-
Hi Do you have the length of the spark plug leads please? Cheers Jack
-
Hello Does any one as a pair of big head lying about and a spare vvc clutch cable? Jack
-
DO you know if it fit a K roller? Jack
-
I have a suby one if interested for a 21 though
-
Hello All I'm having issue with heat built up under the bonnet of my 21. I've already connected an PC to the Emerald K3 and I know after 30mn of driving the temp rises to about 40 degrees C I want to make some experiment with air flow and I was wandring if some new where I could buy stick on thermometres rated from 20 to 60 or more. Cheers Jack
-
Hello All Could I have a quick show of hand, of who had a faulty low oil pressure switch? Mine is behaving strangely, I can have a long spirited drive a the low oil pressure light would not flicker. Stop the car for 5 minutes and the light would turn off. Meanwhile the oil pressure gauge reads a steady 4 bar when on the move and about 2 at idle. Jack
-
Sorry for the hi-jack How does the cars with Savage switch deal with the headlights and all switching which requires 3 position switch? Jack
-
Barbarossa, how did you clean the injector? Jack
-
Cheers Chaps The misfire I'm experiencing is getting worst. I should received some new bits on Monday. I'll get back in touch on Tuesday and arrange to pop round Cheers Jack
-
Thank you Oliver Thank you Ian how long does it takes to check the balancing? Could I just pop round and do it there and then? Jack
-
Hi Giles Thank you for your posting I think I may have found the source of this misfire. It seems its related to the throttle pedal position therefore the TPS. Oily is sending one to me so hopefully that will cure it The engine is a VVC so I don't have a dizzy. It's a version on the VVC-R 😬 which is a rare beast. Jack
-
Hello All Would it be possible to borough a synchrometer to check if my RB are balanced? I'm around Uxbridge or the M40 corridor up to Oxford Cheers Jack
-
Hello all After passing it's MOT, my 21 has developped a mis-fire it only happen underload and often below 2000RPM The engine is a EU2 VVC on roller barrels and Emerald It seems I'm loosing all power for a brief moment (RPM drop suddenly) then everything is ok. I've noticed a slight crack in the cam position sensor which will be changed but i doubt it will cure it. I'm going to check the obvious, earth issue, battery condition, ECU connection, TPS at the weekend. Anything else I should check? Cheers Jack
-
At idle is was showing 4bar ( electrical gauge) and hot 2 bar I know I have plenty of oil because when taking the car for a run the catch tank is filling up with oil I have the Think Auto unit which I want to check Jack
-
I've put nearly 7litre of the oily stuff so there is some oil inside the engine therefore I presume it the switch which is playing up abit. I just like my piece of mind. Jack PS: the light was on and flickering then stayed on
-
Its a switch connected to a light to tell me there is a problem with the oil pressure. The light was constantly on so I think it is set to low. Or I have a major issue with the lubricating system... Jack
-
Hello All I need to check my oil pressure switch, is it just a question a fitting an air line to it at the value I want it to work, connect a multi metre, and bob is my mum's brother? For a K series what should be the value? Cheers Jack
-
I have a puple pump if you want Jack
