jackb_ms
-
Posts
4,189 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Blatmaps
Speed Championship Results
News
Website Help
Downloads
Gallery
Store
Everything posted by jackb_ms
-
Hello all Is there a definitive spec for wires and cable which can be used (insulation requirements, etc)? Kind regards Jack Morgan-Smith
-
Hello All Does someone know the correct Duraboot kit to order for the outside CV? Jack
-
In my case of over cooling, fitting the QED unit sorted the over cooling. I want to test an external remote thermostat; I have one you can borough. It has a slight weep this is why I changed it to a QED one. Jack
-
Hello Colin I'am having a similar issue. Could you let me know the spec for the stud nuts you used as well as the silicone sealant? Are you leak free now? Jack
-
Hello All Could someone let me know if the maps for the Fish n Chip are available to download? Kind regards Jack
-
Hello All Who manufactured the screw on oil cap for the belltank for the K serie dry sump? I'm looking for a spare one with no engraving on it. Jack
-
I did the Cardboard Aided Design and the PLA 3D printing is an aditional step to make sure all the brackets fill fit. The final product will be in stainless or aluminium. If gluing the light is the correct one, the design of the headlight bracket is done. If not I will have to find a different solution. Jack
-
Thanks Stephen I've ordered a 3D printing of the bonnet bracket. The headloight bracket is giving more issue to draw.
-
The 3 triangular shape are design to be bonded to the bonnet The three rod a m5 threaded bar and are design to fit into the 3 flanges on the headlight bracket.
-
3D version of the headlight bracket
-
I am working out how to attach the headlights to the bonnet of my 21. So far, I have created a “bonnet” bracket and now I am working in creating a “headlight bracket. I'm using plastic body Wipac units which were supplied with plastic bowl and metal ring which attaches the headlight to the bowl. I also bought a different type of bracket; however, it uses the same type of ring for attaching the headlight unit. The bracket would be manufactured from stainless steel or aluminium, The headlight has a 5mm ledge. The surface of the bracket matching it would be approx. 15mm. I was thinking could this ledge be used to glue the headlight to the bracket using polyurethane adhesive or another type of adhesive (butyl, two-part Methacrylate,…) Jack
-
Hello All I’m working on a project, and I need some advice on adhesive. Do we have an adhesive expert among us? Jack
-
Hello All There is an interesting video from Drive Tribe on Youtube about graphene as in coolant.
-
I called Ivor Terril for the issue I have with my car. And they told me they won't touch a Caterham. I'm still looking for one. Jack
-
Hello Still haven't found someone to work on it. I'm starting a new job in January so , this took priority. Jack
-
A few bits, nothing major. For exemple the ignition light stopped working. Jack
-
Called them and they are too busy 😞and don't want to touch a Caterham. Anyone else Jack
-
Thank you Johnathan I will give Ivor a call Jack
-
Hello All Could someone receomend a car electrican around Oxford / Didcot / Abingdon? Thank you for your help Jack
-
Hello Jonathan You have mail thank you Jack
-
Hello All Since my rebuilt thne ignition warning light has not beern working. The engine ios a 1.8 VV and the alternator is working fine. Is there a wiring diragram available for me to check the wiring back to the light? thank you Jack
-
I have one pair somewhere I've scrached one of the lense 😞
-
If required I have a spare gauge Jack
-
Hello I use those ones https://www.amazon.co.uk/gp/product/B08GYDH7Q2/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&th=1 Jack
-
Hello All Could someone check my math? The high beam LED signal on the dash is too bright. It uses 40mA. If I'm correct, fitting a 320 Ohms resistor in series should drop the brightness by approx 50%? Jack
