.jpg.cf6e63ae6291a161da5256a79ab301fa.jpg)
Guy Lowe
-
Posts
4,603 -
Joined
-
Last visited
-
Days Won
5
Content Type
Profiles
Forums
Blogs
Events
Blatmaps
Speed Championship Results
News
Website Help
Downloads
Gallery
Store
Everything posted by Guy Lowe
-
Edited, Message to self, do not post after drinking
-
As Jonathan says, carbon particles are electrically conductive so if sucked into a Dremel they will burn it out, trust me I know
-
Do a search on PT, some threads you might want to read.
-
The COMPANY is still active & trading according to Companies House.
-
.thumb.jpg.657e9c400f3ec3cc580ef7cc616e7bba.jpg)
Drilling the 3 holes for a new Momo steering wheel
Guy Lowe replied to David_Stamp's topic in TechTalk
When I bought mine the supplier drilled it, countersunk it and supplied the black anodised bolts & nylons at n extra cost. -
I have the 1" & they are great but I'm only 5' 6" Fitted them 5 years ago & never had a problem with the Velcro but I cleaned the seats thoroughly with Isopropanol before applying.
-
No fooling you Mr Webber
-
Common as muck, seems there are loads available on here
-
I don't believe some people, you spend a fortune on an expensive toy and then bodge a job rather than spend £14 for the CORRECT TOOL and do it properly.
-
A standard right hand wind back tool like THIS will do the job but I found it's easier to get it on the caliper if you grind the small inner lugs off. IYSWIM
-
# 15 Short WB T4/T5/T6 will be fine, just strap down the rear door
-
I used self tappers but my car has Ali panels, best to buy from HERE
-
Good morning, can I have this please as I want to convert my car to in tank fuel pump. Pick up from Twickenham at your convenience would be fine. Guy
-
Hi Phil I will take the tunnel bag please. Will PM you.
-
That's undoing it Tony, of all people you should know how to use an adjustable wrench
-
Thanks for that michaelf, good idea will save on the use of cable ties
-
I don't think you will have "boiled" your brake fluid, the reservoir caps on Caterham master cylinders are notorious for leaking, especially the ones with level switches. Do it up as tight as you dare and wrap to catch any leakage. EDIT: Also I don't fill mine to the top, probably 5mm below the bottom of the filler neck.
-
I bought a small sheet of THIS. It's really easy to cut and then just glue/mastic it on, works fine.
-
Sorry they are too small for me but I can offer you some advice. Puma are well know for under sizing their shoes, I am a size 8 and have several pairs is SpeedCats, but I buy size 9's and they are still a little snug.
-
Oh sorry, my dyslexia again, I really must stop posting on here if I don’t understand the threads
-
Yes ReHaB needs a new AO, please contact Andy Webber A.S.A.P.
-
Are they the same as the Zetec? EDIT: Just re read the OP again, as there is only one on the Sigma they can't be the same . . . . . SORRY
-
Is it De Dion or live axle?
-
Same as SM25T, did it years ago looks much neater IMO.
-
Yes it could but you would see it if it did through the slots in the side of the holder.
.thumb.jpg.657e9c400f3ec3cc580ef7cc616e7bba.jpg)
