Jason Plato

it is a breather and I always ran a little tube and a tablet bottle for a crash tank.

I did 12 years on it.

on the radio 🥰

what sort of time would it be Simon ?. I guess around 7pm ?

I guess we could meet at the layby on the short stretch (1/3 of a mile?) of dual carridgeway after you have left the Monmouth dual carridgeway (A449)and towards the first roundabout at Raglan ?. I would need 30mins notice to get there so a call as you come towards the M5 / M50 junction would be ideal

*thumbup*hood is being collected tomorrow and brought to curborough for you Simon

thanks - Im just awaiting the home address of the hood

Hi Simon Meeting up near abergavenny on sunday eve would be ideal. My mobile is 07771 891947 Caterbram is hopefully bringing it to Curborough - I'll confirm once its all in place

thanks I'll put a post up on the sprint forum

can anyone help me please in bringing a hood from curborough to South Wales / Bristol ? thanks David

could anyone maybe collect a hood and get it southbound ?? donation to NTL for the job and a good bottle

will you be running slicks on track ?

I put a 1.2m length of donkey dick ducting (merlin Motorsport induction ducting) on the end of the throttle body running to the radiator where I then made a cold air separator to take cold air from the front of the rad and above the radiator) see alcester sevens website where myles did the same as mine and documented it. the std airfilter then went on the end of the donkey dick. Made no difference to the performance but wound up some of the sprint competitors who thought it was a modification to the std induction system 😬

I had this, the hoses are a twat to line up on the take off fitting as they are a bit stressed. My guess is that the hose was not sat square on the take off fitting when the nuts were torqued up and hence they now weep a little , I loosed mine , took them off the fitting and cleaned with brake cleaner and then carefully refitted. Sorted. I then only drained the oil via the gauze filter in the rear of the dry sump pan so as not to disturb them again. I also see that a cable is tie wrapped to the block, this will chaff and result in a failier.

he gave me nipples - but no tassels