Peter T Posted April 25, 2006 Share Posted April 25, 2006 Orange Anti Roll bar with balls and covers. £15. Front hubs with discs, bearings fittings, trunnions very good .£120. Hydraulic Titan Clutch, complete for a cable conversion, master cylinder, slave unit, bearing, spacers, hydraulic lines, bleed tee, as new dynoe time only. £ 180. R500 Mango Madness Edited by - Peter T on 25 Apr 2006 11:10:49 Edited by - Peter T on 25 Apr 2006 11:40:39 Edited by - Peter T on 25 Apr 2006 17:29:42 Edited by - Peter T on 25 Apr 2006 17:37:47 Edited by - Peter T on 25 Apr 2006 19:57:38 Edited by - Peter T on 5 May 2006 10:51:01 Link to comment Share on other sites More sharing options...
Kevin Baker Posted April 25, 2006 Share Posted April 25, 2006 Hi Peter I'll take the fog lamp and reversing lamp please. Kevin Superlight 143 - Y Ddraig Oren Bach Link to comment Share on other sites More sharing options...
Peter T Posted April 25, 2006 Author Share Posted April 25, 2006 YHM R500 Mango Madness Link to comment Share on other sites More sharing options...
Manxseven Posted April 25, 2006 Share Posted April 25, 2006 Peter, Front hubs etc (Will these fit a 2002 chassis with Widetrack?) - No they won't ☹️ Orange Anti-Roll bar (is it Widetrack?) - No it isn't ☹️ As you have other buyers I'll pass on both items, Cheers, Simon Caterham Fireblade here Edited by - Manxseven on 27 Apr 2006 17:53:49 Link to comment Share on other sites More sharing options...
BarryT Posted April 25, 2006 Share Posted April 25, 2006 YHM re head stud kit. Barry Link to comment Share on other sites More sharing options...
John Gaines Posted April 25, 2006 Share Posted April 25, 2006 Peter, I am interested in the hubs / discs if Manxseven doesent take them. Regards John. Link to comment Share on other sites More sharing options...
EFA Posted April 25, 2006 Share Posted April 25, 2006 I've had the bellhousing, so there! K2 RUM - Actually I wanted it this colour. Link to comment Share on other sites More sharing options...
Peter T Posted April 25, 2006 Author Share Posted April 25, 2006 Blah, blah R500 Mango Madness Link to comment Share on other sites More sharing options...
Peter T Posted April 25, 2006 Author Share Posted April 25, 2006 Almost time for round two then. 😬 R500 Mango Madness Link to comment Share on other sites More sharing options...
John_C Posted April 26, 2006 Share Posted April 26, 2006 Hi Peter, Are the hubs alloy ? if so I will take them if they are still available. Cheers John. Link to comment Share on other sites More sharing options...
dave1968 Posted April 26, 2006 Share Posted April 26, 2006 Peter If the front Orange ARB is for non-widetrack ill have it if its still available? any chance you could get it to me for the weekend? Dave Edited by - Dave68 on 26 Apr 2006 11:53:13 Link to comment Share on other sites More sharing options...
Manxseven Posted April 27, 2006 Share Posted April 27, 2006 Amended my post above. So over to John G and Dave68 Caterham Fireblade here Link to comment Share on other sites More sharing options...
Peter T Posted May 5, 2006 Author Share Posted May 5, 2006 R500 Mango Madness Link to comment Share on other sites More sharing options...
Area Representative Crudders Posted May 5, 2006 Area Representative Share Posted May 5, 2006 Hi Peter, If the anti-roll bar is still available and is the type that’s 1/2" diameter for the full length rather than 3/8" and sleeved up to 1/2" at the mountings, I'll take it. Crudders Link to comment Share on other sites More sharing options...
Peter T Posted May 5, 2006 Author Share Posted May 5, 2006 I'll check now. R500 Mango Madness Link to comment Share on other sites More sharing options...
Peter T Posted May 5, 2006 Author Share Posted May 5, 2006 It is 13mm all the way from end to end. R500 Mango Madness Link to comment Share on other sites More sharing options...
Area Representative Crudders Posted May 5, 2006 Area Representative Share Posted May 5, 2006 Cheers geez - I'll have it Could I take it off your hands at the next Four Counties or Surrey meet - 9th/18th May? Crudders Link to comment Share on other sites More sharing options...
Legronge Posted May 5, 2006 Share Posted May 5, 2006 Peter I may be interested in the hubs. I take it they are Ford PCD? Link to comment Share on other sites More sharing options...
Peter T Posted May 10, 2006 Author Share Posted May 10, 2006 Yes ford PCD. R500 Mango Madness Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now