Adrian M Posted April 18, 2006 Share Posted April 18, 2006 I have heard that it can react with some head gaskets causing HGF, is this true? Ade Link to comment Share on other sites More sharing options...
Rob Walker Posted April 18, 2006 Share Posted April 18, 2006 I have used it for years. Excellent stuff. Link to comment Share on other sites More sharing options...
Myles Posted April 18, 2006 Share Posted April 18, 2006 On the other hand, I know a number of people who tried it on a very hot trip through the Italian mountains a couple of years back who found that it was a complete waste of time. I do believe they tried an element of 'scientific' testing - i.e. put it in partway through the trip and found no change in the cooling behaviour. Project Scope-Creep is live... Alcester Racing 7's Equipe - 🙆🏻™ Alcester-Racing-Sevens.com Link to comment Share on other sites More sharing options...
Alex Wong1697456877 Posted April 18, 2006 Share Posted April 18, 2006 I've had good benefits from it - 10 degress cooler on a trackday. Link to comment Share on other sites More sharing options...
John Howe Posted April 18, 2006 Share Posted April 18, 2006 Used it without problems for the last five years... from the first upgrade, so I can't give you a before or afterwards! JH Deliveries by Saffron, the yellow 230bhp Sausage delivery machine Link to comment Share on other sites More sharing options...
JampJ Posted April 18, 2006 Share Posted April 18, 2006 Cheapest I've found is from SC Parts Group Ltd. £8 plus P&P 01293 84 7210 www.scparts.co.uk Cheers J&J JFDI (Just F*****g Do It) Link to comment Share on other sites More sharing options...
I.Mupferit Posted April 18, 2006 Share Posted April 18, 2006 I used on my old Zetec to good effect but conversely have heard of others who said it made no discernible difference. Brent 2.3 DURATEC SV Reassuringly Expensive R 417.39 😬 Link to comment Share on other sites More sharing options...
Peter Carmichael Posted April 19, 2006 Share Posted April 19, 2006 This ain't science. This is a belief system and rumour mill in operation. Let me paraphrase: "Some observations in uncontrolled conditions confirm a change in behaviour consistent with the purchaser's interpretation of the manufacturers claims. An equal number of subjective observations discount the manufacturers claims. The majority of observations rely on the dodgy temperature gauge that no-one believes is accurate, which only measures temperature at a single point in a complex system. The coolant flows rates are never measured. Unqualified results are presented back with loose reference to the original claims for the product and are used to justify the emotional decision to buy for the next generation." Link to comment Share on other sites More sharing options...
Alex Wong1697456877 Posted April 19, 2006 Share Posted April 19, 2006 Dear Peter Pedantic Cynical Carmichael. How objective do you want to be? Track driving at Cadwell. 95deg towards the end of the session. Next session with WW, 85 deg towards the end of the session. Same car, same weather, same sort of speed, same amount of time on track. Digital SPA gauge. It's a detergent that improves the interface between metal and water by alltering surface tension. If your cooling system is working well and you have no air in your system, it probably does not improve things. Alex edited to correct the spelling of pedantic before you pointed it out! 😬 Edited by - Alex Wong on 19 Apr 2006 09:01:32 Link to comment Share on other sites More sharing options...
Peter Carmichael Posted April 19, 2006 Share Posted April 19, 2006 I refer to: "[snip]observations in uncontrolled conditions confirm a change in behaviour consistent with the purchaser's interpretation of the manufacturers claims. [snip] observations rely on the [snip] temperature gauge [snip] which only measures temperature at a single point in a complex system." The snipping is not intended to in any way change the meaning of my general comment, but just trims the general comment down to the specific bit which applies to your observation. Manufacturer's claim:It's a detergent that improves the interface between metal and water by alltering (sic) surface tension If you want to get objective, you need to bring in a whole load more factors... 1. You make no mention of the existing coolant brew. 2. You take no consideration of having completely shagged the pressurisation of your system by opening the expansion tank while the system was still hot. (but its a VX not a K so what does it matter) 3. The old "I blindly believe what the gauge tells me and mine's a SPA so ner ner ne ner" line of reasoning, disregarding that the sender may be inappropriately sited to tell your whether you engine is cooler. 4. No mention of any thermostat in the system. I've got a fantastic additive for coolant right here. It contains urea. When mixed with water urea has an endothermic reaction, drawing heat out of the engine. Unlike common salt, urea does not promote metal corrosion. My supply line can produce a few litres a day at £20 per litre. Link to comment Share on other sites More sharing options...
Alex Wong1697456877 Posted April 19, 2006 Share Posted April 19, 2006 😬 Link to comment Share on other sites More sharing options...
Mr Locust Posted April 19, 2006 Share Posted April 19, 2006 I would suggest that to achieve a meaningful result you would have to measure the following (in addition to the consistent lap times and preferably same weather conditions); >thermostat jacked to wide open position, closing off any waterpump bypass circuit >top hose, bottom hose, engine oil rail and ambient temperatures monitored to allow the rise over ambient to be monitored Otherwise you are just monitoring the effectiveness of the thermostat in maintaining the coolant temperature at its location. Peter, are you taking the p1ss or just trying to sell it ❗ 😬 Ian Green and Silver Roadsport 😬 Link to comment Share on other sites More sharing options...
Alex Wong1697456877 Posted April 20, 2006 Share Posted April 20, 2006 I suspect your special brew is rather high in salts...... Link to comment Share on other sites More sharing options...
David Brown Posted April 20, 2006 Share Posted April 20, 2006 Just done some work with Honeywell on sensors being used to measure catalyst temperature on commercial diesels. This is to control urea injection to reduce emissions. Always wondered if the tank was under the driver's seat! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now