Irrelevant Posted March 14, 2006 Share Posted March 14, 2006 For FIA/standard roll bar. Has the flap for a petty strut. All poppers OK. Zip fine. No tears. £50 Pickie here Can bring to Surrey meet. Link to comment Share on other sites More sharing options...
paul abrahams Posted March 14, 2006 Share Posted March 14, 2006 Adam - first shout on the tonneau, but could you give me the dimensions between the poppers so I can check them against mine. Also I've got the s type leather seats on a standard vx classic. I know I will have to remove the headrests but will it fit over the seats if I do, what type do you have? Thanks Link to comment Share on other sites More sharing options...
Irrelevant Posted March 14, 2006 Author Share Posted March 14, 2006 Hi Paul. I will measure the poppers tonight. It's been on a couple of cars and fitted OK so as long as you have standardish poppers you should be OK. Wrt seats - I think you will be OK if you take your headrests off. Alternatively, you can get Jill Judd (IIRC) to add pockets into the tonneau. I have lowback race seats so comparison of these with yours will be no help. Link to comment Share on other sites More sharing options...
Irrelevant Posted March 15, 2006 Author Share Posted March 15, 2006 Paul . . . .measurements as follows. Imagine this diagram is the passenger's side with the zip running parallel to the line A -> G. Obviously, the driver's side is symmetrical. AFAIK poppers A and G should be in the same place on all cars. ----------B------------------A-- --------/-----------------------/ -------/------------------------/ ------/-------------------------/ -----C------------------------- / ----/---------------------------/ ----/---------------------------/ ----/---------------------------/ ---D----------------------------/ --------------------------------/ --------------------------------/ --------------------------------/ --------------------------------/ --------------------------------/ -----------E-----------F------G-- A -> B = 423mm B -> C = 285mm C -> D = 390mm D -> E = 475mm (measured from centre of each popper in a line not around the curve) E -> F = 310mm F -> G = 193mm OK? Edited by - AdamHay on 15 Mar 2006 00:29:35 Link to comment Share on other sites More sharing options...
paul abrahams Posted March 15, 2006 Share Posted March 15, 2006 Adam, thanks for that - very innovative I will check tonight and mail you later Link to comment Share on other sites More sharing options...
Mike Bey Posted March 16, 2006 Share Posted March 16, 2006 Adam If Paul's not interested, I am. Thanks Mike Link to comment Share on other sites More sharing options...
Irrelevant Posted March 16, 2006 Author Share Posted March 16, 2006 Paul . . .. . will it fit then? Mike - I will give Paul until the end of the day to confirm whether he wants it or not. Link to comment Share on other sites More sharing options...
Mike Bey Posted March 16, 2006 Share Posted March 16, 2006 Adam That's fine - let me know. Mike Link to comment Share on other sites More sharing options...
paul abrahams Posted March 16, 2006 Share Posted March 16, 2006 Adam - YHM Link to comment Share on other sites More sharing options...
Irrelevant Posted March 17, 2006 Author Share Posted March 17, 2006 Paul - received your mail now.... Mike - it's yours if you want it Edited by - AdamHay on 17 Mar 2006 13:31:20 Link to comment Share on other sites More sharing options...
Irrelevant Posted March 17, 2006 Author Share Posted March 17, 2006 Link to comment Share on other sites More sharing options...
Mike Bey Posted March 17, 2006 Share Posted March 17, 2006 Adam Will have it - sorry for the delay - been in hospital for the birth of my daughter - born at 1:47pm today - 7lb 4oz - gorgeous 😬 😬 😬 😬 😬 😬 I am in Westerham in Kent - where are you? Mike Link to comment Share on other sites More sharing options...
Wile7 Posted March 17, 2006 Share Posted March 17, 2006 Mike - congratulations *thumbup* Dave Ardley. White Xflow with Clams 'I don't care to belong to a club that accepts people like me as members' Photos here Link to comment Share on other sites More sharing options...
Mike Bey Posted March 17, 2006 Share Posted March 17, 2006 Thanks Mate 😬 😬 Link to comment Share on other sites More sharing options...
Nifty Posted March 17, 2006 Share Posted March 17, 2006 Patricia 🤔 Congratulations *thumbup* 😬 😬 😬 Keep off the straight and narrow 😬 Link to comment Share on other sites More sharing options...
Irrelevant Posted March 17, 2006 Author Share Posted March 17, 2006 Mike - Congrats on the baby Bey. Y will HM in a couple of minutes when I've written it Link to comment Share on other sites More sharing options...
Mike Bey Posted March 18, 2006 Share Posted March 18, 2006 Adam Will pick up the mail when I log on to my laptop. Nifty Already got a Patricia in the family - my sister. I favour just going for Patrick, although it'll be tough on the little girl Mike Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now