DTHTB's

[Mark Ferguson]

I have a set of DTHTB's ready to go onto my engine when i have it re-built & it currently has the black plastic rover fuel rail fitted with a round cylinder on one end (dont know what that is???) with the large fuel inlet & the small outlet at other end (end with cylinder on)

I have seen a piccie with an ali fitted rail without the cylinder & goodridge hoses in & out.

 

can the original rover fitted plastic one with cylinder be directly replaced with the ali one & what size hose fitments are they on the goodridge hoses plse

 

what is the cylinder object on the end, looks like something for air ???

 

good job someone will be doing the work for me, i would make a real mess

[oilyhands]

Mark,

 

The cylindrical object is the fuel pressure regulator.

 

The stock fuel rail is adequate for the job, you will just be wasting your money, you will need a fuel rail (£50?) connectors (£20) and a fuel pressure regulator (£50?) to do the job that the stock fuel rail does rather well.

 

Oily

[Mark Ferguson]

Thanks Dave, didnt want to ask you to many questions

feel guilty everytime i ring u.

 

Will send up bit this weekend/or monday for balancing, see u on 11th april.

thanks

[Mick Day]

Mark

 

If all things go to plan I should be dropping your flywheel off at Daves on the 17th March.

 

Mick

[Mark Ferguson]

Thanks Mick,

will be there on the 11th april for mine.

Cah cheque now if you want already budgeted for it

thanks & appreciated, good luck with your build

[Mick Day]

Forgot I hadn't cashed the cheque I'll get round to it next week.