Sheds Moderator Posted February 28, 2006 Share Posted February 28, 2006 Needed for a 1984 Suzuki RG250. Nothing on Ebay ATM. BTW Rossybee, if you see this would you mind lobbing it at Coose etc on 7T? Ta. Link to comment Share on other sites More sharing options...
Rob Morris Posted March 1, 2006 Share Posted March 1, 2006 Would this be one of the Suzuki ugly multi position switches? Still a great little bike.............ZOOM ! 😬 Link to comment Share on other sites More sharing options...
Sheds Moderator Posted March 2, 2006 Author Share Posted March 2, 2006 Er, dunno, never seen it. The bike came ex attempted theft with wiring everywhere. . The RH switch is pretty conventional as they go. As for ZOOM, I dunno yet, I can't get a spark ☹️. The rear lights work though. The coil is non standard. One day I'll buy something that just works, and then what will I do at weekends? Link to comment Share on other sites More sharing options...
MartinWoodham Posted March 2, 2006 Share Posted March 2, 2006 BOSS- if you mean an RGV250, try a post here. Martin Roadsports B with upgradeitis Link to comment Share on other sites More sharing options...
Sheds Moderator Posted March 3, 2006 Author Share Posted March 3, 2006 Sadly no, it's an RG, the 1980s parallel twin predecessor to the RGV loonybike. Still loony though, when I eventually get it to run. Link to comment Share on other sites More sharing options...
Rob Morris Posted March 5, 2006 Share Posted March 5, 2006 I'm off to the classic bike show April 22nd so if you can find one I could look at the jumble section. I'd need to know you top price and confirm what it should look like (multi position I think which was VERY common on Suzuki's) Also which model RG you have Mk 1, 2 or 3...............1& 2 were near as dam it identical. Have you ridden it yet................they are great fun and good like stink..............did tend to burn out a bit too early so many were replaced with 350LC engines. But for a 250 they were great. Link to comment Share on other sites More sharing options...
Sheds Moderator Posted March 9, 2006 Author Share Posted March 9, 2006 Thanks Rob. I'm in the throes of moving at the mo but will keep you posted. I have to say it hasn't yet run, but that's a detail. 😬 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now