Jump to content
Click here if you are having website access problems ×

roll bar


caterhamnut

Recommended Posts

You can enlarge the holes - I had it done - but the angle of the support arms is different on the FIA bar to a standard roll bar due to the extra height and the angle of forward incline.

 

This has the effect of needing not only larger diameter holes, but also the holes positioned further forwards. So far so dandy, but bear in mind that moving the holes forward leaves a gap behind them where the original bar's support arms used to pass through the boot cover. Result: snug at the front, big 'ole for letting in gallons of water at the back....

 

The marine cover-maker who did the work for me managed to effect a waterproof(-ish) compromise, but it's always been just that - a compromise. Doesn't look too good and I'll be replacing the modified cover with a proper FIA boot cover once we return to the UK.

 

Pierson

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...