Chrispy Posted January 10, 2002 Share Posted January 10, 2002 Due to over-enthusiasm, damp road and cold tyres I had a slight "off" just before Christmas which has resulted in a 6 inch dent / graunch on the side bodywork just infront of the exhaust manifold exit. Any advice on whether this will mean reskinning the whole side and any recommendations on good bodyshops in the Thames Valley. Cheers. Link to comment Share on other sites More sharing options...
Graham Sewell Posted January 10, 2002 Share Posted January 10, 2002 In the end, there can be only one - Arch Motors (01480-459661) - as the average panel beater would not know what to do with chassis rails... Link to comment Share on other sites More sharing options...
JKJ Posted January 13, 2002 Share Posted January 13, 2002 After a similar excursion, mine went to Caterham for a re-skin/respray, and a damn fine job they did too. Mind you they could have just sent it to Arch. Link to comment Share on other sites More sharing options...
EFA Posted January 13, 2002 Share Posted January 13, 2002 D Post Edited by - Fat Arnie on 13 Jan 2002 11:34:50 Link to comment Share on other sites More sharing options...
EFA Posted January 13, 2002 Share Posted January 13, 2002 If you send it to Caterham the re-skin is carried out by Roy Crane and the paint is done by TSK. It is possible Roy is now a FTE of Caterham athough he used to work for himself. Fat Arn The NOW PROVEN R500 Eaterid=red> See the Lotus Seven Club 4 Counties Area Website hereid=green> Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now