MarcNS Posted February 16, 2006 Share Posted February 16, 2006 Im struggling to get a set of wheels to fit the Ital stud pattern. I am left with the original KN's Will buy new or used. A) Any stockists/sellers out there? B) What wheels did Caterham do for an Ital fitting? Regards, Marc Link to comment Share on other sites More sharing options...
smithj41 Posted February 16, 2006 Share Posted February 16, 2006 George Pollry supply some nice wheels - Compomotive CXR http://www.polleymotorsport.co.uk/ South Yorkshire Se7ens Link to comment Share on other sites More sharing options...
Tom_C Posted February 16, 2006 Share Posted February 16, 2006 Try a Triumph parts supplier such as Rimmer Bros in Lincoln. here Cheers Tom FH54WLX - only the car supports ManU, honest! Link to comment Share on other sites More sharing options...
MarcNS Posted February 16, 2006 Author Share Posted February 16, 2006 Thanks Guys, I would have liked some HPC's but not sure if any were made for Ital fitting, otherwise I will check out those listed. Marc Link to comment Share on other sites More sharing options...
John_C Posted February 16, 2006 Share Posted February 16, 2006 Hi, I have five 6" X 13 Silver Minators in as new condition which have only done 300 ish road miles. Please let me know if you are interested. (I do not have access to email until the weekend) Thanks John Link to comment Share on other sites More sharing options...
MarcNS Posted February 17, 2006 Author Share Posted February 17, 2006 Thanks John post me and let me know how much and if they have correct offset for a caterham. What width tyres will they take? Regards, Marc Link to comment Share on other sites More sharing options...
John_C Posted February 17, 2006 Share Posted February 17, 2006 Hi, As they are as new I am looking for £45.00 each. I have 185/60 13" tyres fitted but I have had 205's on other 6" wheels. They are the correct offset for a live axle, they are fitted to my 96 live axle car now. Cheers John Link to comment Share on other sites More sharing options...
paul abrahams Posted February 17, 2006 Share Posted February 17, 2006 John - I would be very interested in these if Marc doesn't want them, so second dibs please Link to comment Share on other sites More sharing options...
Clawhammer Posted February 19, 2006 Share Posted February 19, 2006 Hi guys Not wanting to hijack your thread, so check out For Sale page, am just going to post some wheels and tyres on there Yellow and Carbon cycle wings dodging the horses in the New Forest Link to comment Share on other sites More sharing options...
paul abrahams Posted February 19, 2006 Share Posted February 19, 2006 John YHM 😬 Link to comment Share on other sites More sharing options...
John_C Posted February 19, 2006 Share Posted February 19, 2006 Hi Paul, YHM back Regards John Link to comment Share on other sites More sharing options...
Wile7 Posted February 20, 2006 Share Posted February 20, 2006 Bacon Butty has just posted some minators that are an Ital fitting over on the 'for sale' thread Dave Ardley. White Xflow with Clams 'A child of five would understand this. Send someone to fetch a child of five' Photos here Link to comment Share on other sites More sharing options...
MarcNS Posted February 20, 2006 Author Share Posted February 20, 2006 STILL Looking for 15' Minilites or HPC's Marc The CarThe Club Built Vvvrrrooomm Link to comment Share on other sites More sharing options...
Archie Procter Posted February 20, 2006 Share Posted February 20, 2006 What wheels did Caterham do for an Ital fitting? You might be better asking that question in techtalk, or ring Caterham Parts dept? Certainly the only HPCs I've heard of (not that I'm any kind of expert you understand!) are de-dion chassis and therefore will have the 4.25inch PCD. Another thought - can you buy them from minilite directly? See here - might be worth giving them a call? HTH Andrew Link to comment Share on other sites More sharing options...
MarcNS Posted February 24, 2006 Author Share Posted February 24, 2006 Still looking 15 or 16' wheels but about to go for some Toyo r888 tyres on my 13' rims. Marc Link to comment Share on other sites More sharing options...
paul abrahams Posted February 26, 2006 Share Posted February 26, 2006 John - any chance of photos, as discussed I'm still looking 😬 Link to comment Share on other sites More sharing options...
John_C Posted February 27, 2006 Share Posted February 27, 2006 Hi Paul, Just sending a picture now, I had to borrow a lead for the camera. Cheers John Link to comment Share on other sites More sharing options...
paul abrahams Posted February 27, 2006 Share Posted February 27, 2006 Thanks John - YHM Link to comment Share on other sites More sharing options...
Archie Procter Posted March 6, 2006 Share Posted March 6, 2006 Try here - looks like just what you're looking for Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now