Rob Walker Posted February 15, 2006 Share Posted February 15, 2006 Standard Roll bar non FIA de dion 1996 -1998 £20 One Luke 4 point harness, non FIA , Black,Has push button release.( New) £25. One Caterham 4 point FIA harness red, black shoulder pads £40 Head restraint kit for FIA roll bar (new) £20 Early Freestyle/Juno track handling kit includes 4 springs and two ali spacers can be used on Caterham bitsteins with or without adj platforms(new never fitted) £50 One set of 4 brake pads for standard front brakes ( new still in CC packet) £18 Rob Edited by - Rob walker on 15 Feb 2006 20:38:26 Link to comment Share on other sites More sharing options...
lrem Posted February 15, 2006 Share Posted February 15, 2006 Hi Rob, I'll take the red FIA harness please. Cheers Lionel Link to comment Share on other sites More sharing options...
Carl Francis Posted February 15, 2006 Share Posted February 15, 2006 Hi Rob I am interested in the head restraint for the FIA roll bar, numpty question but I assume this clamps around the diagonal? Carl Link to comment Share on other sites More sharing options...
Dannyboy Posted February 15, 2006 Share Posted February 15, 2006 Rob. Interested in the handling kit. Could you e-mail me details/ photo if poss to daniel 'dot' malkin @ osborne 'dot' co 'dot' uk Dannyboy removing the gaffer tape Link to comment Share on other sites More sharing options...
Rob Walker Posted February 15, 2006 Author Share Posted February 15, 2006 Carl yes it clamps around both the diagonal and the vertical upright and has and adjustable restraint pad. Link to comment Share on other sites More sharing options...
Rob Walker Posted February 15, 2006 Author Share Posted February 15, 2006 Danny I cannot supply a photo, the kit comprises four springs not hard to picture what they look like. The front are black in colour the rears yellow. Front springs are 8.75" L X 1.9" ID the rears 11.25" X 1.9" ID. the ali spacers 2.5" in length. All are new. Rob Edited by - Rob Walker on 15 Feb 2006 14:19:52 Link to comment Share on other sites More sharing options...
Carl Francis Posted February 15, 2006 Share Posted February 15, 2006 Rob I'll take the head restraint - YHM Carl Link to comment Share on other sites More sharing options...
Dannyboy Posted February 15, 2006 Share Posted February 15, 2006 Any ideas on spring rates??? Dannyboy removing the gaffer tape Link to comment Share on other sites More sharing options...
Rob Walker Posted February 15, 2006 Author Share Posted February 15, 2006 Gary May of Freestyle keeps the spring rates a closely guarded secret. Sorry if I tell everyone will just buy their spring direct. I am sure you understand. Link to comment Share on other sites More sharing options...
Dannyboy Posted February 15, 2006 Share Posted February 15, 2006 Hokay.. I'll take them if that's ok...??? Dannyboy removing the gaffer tape Edited by - Dannyboy on 15 Feb 2006 14:27:27 Link to comment Share on other sites More sharing options...
phillinda Posted February 15, 2006 Share Posted February 15, 2006 Rob Ignore question. Not reading message properly Phil 1997 Brooklands Green 1.8 Supersport Edited by - phil&linda on 15 Feb 2006 14:29:21 Link to comment Share on other sites More sharing options...
Rob Walker Posted February 15, 2006 Author Share Posted February 15, 2006 Phil. The springs should fit any of the caterham bilsteins except the VX race which reqire 2.25" ID springs. As to spring rates suitabilty this is subjective, you will have to put your faith in Freestyle. IMO the kit will give a firm ride with little body roll suited to track use and grippy tyres. Rob Link to comment Share on other sites More sharing options...
Richard K Posted February 15, 2006 Share Posted February 15, 2006 Rob Hi I will take the Luke harness Have sent blatmail Richard Link to comment Share on other sites More sharing options...
AndyPandy Posted February 16, 2006 Share Posted February 16, 2006 I'll have the duratec in the corner 😬 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now