Peter T Posted February 10, 2006 Share Posted February 10, 2006 As i am breaking my 7 i am advertising my engine here first. This is an all steel fresh built with dyno sheet and bills. It would be ideal for a Caterham installation as i could sell as a package which could include . Dry sump system Wiring loom. DTA PRO 8 ECU. Air filter. Starter motor. Oil and fuel lines. ETC. basically a complete install/swap. £7.5k. Carbon Components Here K9 Composites Edited by - Peter T on 14 Feb 2006 19:54:22 Edited by - Peter T on 4 Apr 2006 15:52:14 Edited by - Peter T on 5 May 2006 07:59:00 Edited by - Peter T on 6 Jun 2006 08:27:59 Edited by - Peter T on 18 Jun 2006 22:04:23 Edited by - Peter T on 21 Jun 2006 15:42:31 Link to comment Share on other sites More sharing options...
EFA Posted February 10, 2006 Share Posted February 10, 2006 Do you have a dyno sheet from Field Motorsport??? Link to comment Share on other sites More sharing options...
Peter T Posted February 10, 2006 Author Share Posted February 10, 2006 Sorry but i don't believe in bulsh*t. I have a geniune dynoe from a reputable person who will clarify my claims. Carbon Components Here K9 Composites Link to comment Share on other sites More sharing options...
Peter T Posted February 10, 2006 Author Share Posted February 10, 2006 PS, why don't you show your true identity?????? Carbon Components Here K9 Composites Link to comment Share on other sites More sharing options...
caterhamnut Posted February 10, 2006 Share Posted February 10, 2006 If it goes anything like Marks similarly powered VX engine, then its a stonker - good luck with the sale Peter - apparently Marks car was awesome at Silverstone today www.mycaterham.com here 88,500 miles -1st 1.6k Supersport, '95 Motor Show car Link to comment Share on other sites More sharing options...
EFA Posted February 10, 2006 Share Posted February 10, 2006 I have a geniune dynoe from a reputable person who will clarify my claims. Who's that then? Link to comment Share on other sites More sharing options...
Jason Plato Posted February 12, 2006 Share Posted February 12, 2006 slight thread diversion ...... I understand Mark went home early from Silverstone as the new engine knackered him out 😬 - guess there are worse ways in life to tire yourself out Link to comment Share on other sites More sharing options...
Mark Durrant Posted February 12, 2006 Share Posted February 12, 2006 I've seen this engine on the rollers and it's awsesome and no it was not at Field Motorsport but at very highly rated venue in the South East. FTAO Dave Rave Either state your case or respect Peter T's post. I suggest you treat this post with the respect you would expect when selling something yourself using this Blatchat handle or another Mark D Comp Sec Link to comment Share on other sites More sharing options...
Harry Flatters Posted February 12, 2006 Share Posted February 12, 2006 No, no Mark, leave it, he's not worth it ❗ *arrowright*Harry Flatters *arrowright* AKA Steve Mell - Surrey AO and Su77on Se7ener Link to comment Share on other sites More sharing options...
Anthony Posted February 13, 2006 Share Posted February 13, 2006 I have spent a small fortune trying to get close to the spec/output of this engine. It is truely awesome. Straight fit into majority of chassis, with Pete having done all the hardwork Link to comment Share on other sites More sharing options...
Peter T Posted February 14, 2006 Author Share Posted February 14, 2006 It is a 16 valve Xe Vauxhall engine. Iron block 86.25mm Omega intruder Forged pistons. Doug Kiddie Lightweight Narrow Journal Touring Car spec steel Crank. Never been ground standard journal size. Arrow steel lightweight con rods.ARP bolts. Compression ratio 11-5-1. Combustion bowl 41 CCs. Full race spec head with Paul Ivey one piece valves. Inlet valves 1mm oversize. Isky double valve springs. Titanuim lightweight valve caps. Cooling and oil modifications to head. Cometic composite Head gasket. ARP head stud bolts. ARP Flywheel bolts Twin Plate 7.25" Organic clutch. lightweight steel flywheel Sputter bearings throughout bottom end. Modified SBD/ inlet/ exhaust cams with 11.9mm lift. Swindon Direct to head race engineered Roller barrel set up.With 8 Injectors. iw058 injectors running 3.5 Bar fuel pressure. Carbon Fibre inlet trumpets. ITG Air filter DTA PRO 8 ECU with software. Custom built engine loom. Ignition block. Brise race geared starter Motor. Carbon Fibre plug cover. Full pace externall 5 port twin scavenge dry sump system, with Pace modified sump. Pace 6.5" splitable dry sump tank. Remote oil filter housing. All Mocal pipework incuding JIC fittings. Just rebuilt again after i purchased it new in 2002. Never done more that 100 miles since re fresh. Dynoe sheets to prove and bills. Like new, genuine 270 BHP 8630 RPM. Torque 175lbft@ 6500. It has a lovely linear hp and toque curve for its delivery. This is ideal for a complete upgrade to any 7 for serious performance levels, everything included for a straight swop. Want £7.5k for the entire package. Photos available. Tel no- 0797 155 7312. Carbon Components Here K9 Composites Edited by - Peter T on 4 Apr 2006 15:53:37 Edited by - Peter T on 5 May 2006 07:59:45 Edited by - Peter T on 6 Jun 2006 08:28:19 Edited by - Peter T on 15 Jun 2006 10:52:40 Link to comment Share on other sites More sharing options...
Jason Plato Posted February 14, 2006 Share Posted February 14, 2006 you may consider an ad in Autosport or Motorsport news for this spec of engine ? Link to comment Share on other sites More sharing options...
Anthony Posted February 15, 2006 Share Posted February 15, 2006 Bargain, given the cost of building this from scratch and then having the hardwork of setting it up etc etc. Anthony Link to comment Share on other sites More sharing options...
Peter T Posted February 17, 2006 Author Share Posted February 17, 2006 Last week to see/hear in the car. Carbon Components Here K9 Composites Link to comment Share on other sites More sharing options...
Peter T Posted April 4, 2006 Author Share Posted April 4, 2006 Price revised. Link to comment Share on other sites More sharing options...
Claire Voyant Posted April 4, 2006 Share Posted April 4, 2006 Hasn't Arnie got rid of his engine? He might need a replacement! Link to comment Share on other sites More sharing options...
EFA Posted April 5, 2006 Share Posted April 5, 2006 Maybe I'm getting a Duratec...... K2 RUM - Actually I wanted it this colour. Link to comment Share on other sites More sharing options...
Gambo Posted April 6, 2006 Share Posted April 6, 2006 My engine just gone bang. Large hole in block. ☹️ ☹️ ☹️ will call you tomorrow. RED 2.0 HPC Link to comment Share on other sites More sharing options...
Peter T Posted April 13, 2006 Author Share Posted April 13, 2006 Link to comment Share on other sites More sharing options...
Gambo Posted April 13, 2006 Share Posted April 13, 2006 Sorry Peter . Bought Davey bee's short motor. SWMBO was not very accomidating when I told her the price of your motor Best of luck with the sale. RED 2.0 HPC Link to comment Share on other sites More sharing options...
Peter T Posted April 14, 2006 Author Share Posted April 14, 2006 Thanks, Davey's had a few parts of me also, his new engine sounds awsome. *thumbup* Link to comment Share on other sites More sharing options...
Peter T Posted April 23, 2006 Author Share Posted April 23, 2006 Last chance before i decide to break it into parts. R500 Mango Madness Link to comment Share on other sites More sharing options...
Dickie Normuss Posted April 23, 2006 Share Posted April 23, 2006 I need an alternator Before Wednesday morning ☹️ ☹️ Seek forgiveness, not permission. Rules are for the interpretation of wise men and the obedience of fools. Edited by - ric on 23 Apr 2006 20:57:11 Link to comment Share on other sites More sharing options...
Peter T Posted April 23, 2006 Author Share Posted April 23, 2006 I do not have an alternator Matt. R500 Mango Madness Link to comment Share on other sites More sharing options...
EFA Posted April 23, 2006 Share Posted April 23, 2006 Think I saw one on Ebay earlier today. Search titles containing "caterham" in car parts. K2 RUM - Actually I wanted it this colour. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now