Mark Ferguson Posted January 12, 2006 Share Posted January 12, 2006 Hi all, 2 questions. 1/. When i fit the emerald can i junk the mems & mfu or just the mems ??? & anything else ??? 2/. What is best thing for cleaning casing of alternator / starter etc, lots of road grim, oil etc on it, is gunk ok ??? Thanks, Fergie Link to comment Share on other sites More sharing options...
Mike Bees Posted January 12, 2006 Share Posted January 12, 2006 1. You still need the MFU. Maybe you could eliminate it with some loom changes, maybe not - you'd have to speak to Emerald. 2. I would have though Gunk would do. Carb cleaner is probably better. Mike Link to comment Share on other sites More sharing options...
Myles Posted January 12, 2006 Share Posted January 12, 2006 Mark, I assume you are talking about a k-series and I assume (?) you know about the EU3/EU3 loom compatibility issues??? Project Scope-Creep is live... Alcester Racing 7's Equipe - 🙆🏻™ Alcester-Racing-Sevens.com Link to comment Share on other sites More sharing options...
Mark Ferguson Posted January 12, 2006 Author Share Posted January 12, 2006 Hi Myles, k-series eu2 version Link to comment Share on other sites More sharing options...
Myles Posted January 12, 2006 Share Posted January 12, 2006 Good, good. I think there is one wire you might consider cutting - otherwise the Emerald will remain powered with the ignition off (unless you activate the FIA switch). Other than that, shouldn't be anything to worry about. Project Scope-Creep is live... Alcester Racing 7's Equipe - 🙆🏻™ Alcester-Racing-Sevens.com Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now