Support Team Shaun_E Posted January 11, 2006 Support Team Share Posted January 11, 2006 Anyone got pictures or a good description of what needs fettling and by how much to fit the new Caterham 8 spokes (8" wide) to the rear of an older de-dion car? Or is it blindingly obvious when you try and fit them? Any help appreciated before I get the angle grinder out 😬. Yellow SL #32 Link to comment Share on other sites More sharing options...
Gambo Posted January 11, 2006 Share Posted January 11, 2006 blindingly obvious 😬 Stick one on. RED 2.0 HPC now on throttle bodies Link to comment Share on other sites More sharing options...
Tight fart Posted January 12, 2006 Share Posted January 12, 2006 My 89 car just needed 10mins with the angle grinder around the ears.  A7 RDP pics here Link to comment Share on other sites More sharing options...
Support Team Shaun_E Posted January 12, 2006 Author Support Team Share Posted January 12, 2006 Cheers - will try at the weekend. Yellow SL #32 Link to comment Share on other sites More sharing options...
I reply to every thread Posted January 12, 2006 Share Posted January 12, 2006 Just be careful with the de dion tube welds Link to comment Share on other sites More sharing options...
Mark Durrant Posted January 12, 2006 Share Posted January 12, 2006 Also check where your balance weights are on the inside of the rim  Mark D Comp Sec  Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now