robmar Posted December 12, 2005 Share Posted December 12, 2005 is it the same as standard CRB K series, bell tank dry sump system might as well replace whilst out even thou no problems with current one... rob Link to comment Share on other sites More sharing options...
Mike Bees Posted December 12, 2005 Share Posted December 12, 2005 Yes, same CRB but different clutch release arm. While you've got the release arm out check very carefully to make sure that it's not bent - early ones had a habit of very slowly folding up - hard to spot without a 'straight' one to compare it to. Mike Edited by - Mike Bees on 12 Dec 2005 17:34:52 Link to comment Share on other sites More sharing options...
shn7 Posted December 12, 2005 Share Posted December 12, 2005 And it's been known for one of the prongs to snap off. Found this when I dismantled my current car. Steve. Link to comment Share on other sites More sharing options...
Rob Walker Posted December 12, 2005 Share Posted December 12, 2005 There is a new SKF bearing and carrier . It looks like the one fitted to the VX running the belltank but pushed onto a plastic carrier. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now