TopQ1967 Posted December 1, 2005 Share Posted December 1, 2005 Hi, Are the CC roller barrels used on a K- series the same as used on CC CSR's Duratec? Cheers, Quirin Link to comment Share on other sites More sharing options...
EFA Posted December 1, 2005 Share Posted December 1, 2005 Yes, The Duratec uses an adaptor plate to fit the TB's to the head.  Link to comment Share on other sites More sharing options...
Bob Corb Posted December 2, 2005 Share Posted December 2, 2005 The minister Duratecs shown on their website use K rollers with an adaptor. The Cosworth roller barrel (which I think is fitted to the CSR260) shown on their website here is a different design. Link to comment Share on other sites More sharing options...
EFA Posted December 2, 2005 Share Posted December 2, 2005 *eek*Bows to Bob's better knowledge   Link to comment Share on other sites More sharing options...
Leadership Team SLR No.77 Posted December 2, 2005 Leadership Team Share Posted December 2, 2005 I guess they're not technically DTH TBs in the Duratec installation then 😬 Stu. Link to comment Share on other sites More sharing options...
AMMO Posted December 2, 2005 Share Posted December 2, 2005 The latest throttle bodies are bespoke items made either by Titan or more recently by Cosworth. The Titan ones are two bodies with a linkage between the two. The Cosworth DTH TB is one piece.  I suppose the ealy Minister engine had a K series one grafted on. The late bodies are definately bespoke items that fit only the Duratec not the Rover engine. AMMO Link to comment Share on other sites More sharing options...
Mike Bees Posted December 2, 2005 Share Posted December 2, 2005 ... but could probably be made to fit with an adaptor plate 😬 Link to comment Share on other sites More sharing options...
AMMO Posted December 2, 2005 Share Posted December 2, 2005 😬 Yes, if neccessary. 😬 AMMO Link to comment Share on other sites More sharing options...
Bob Corb Posted January 17, 2006 Share Posted January 17, 2006 ooops Edited by - Bob Corb on 17 Jan 2006 08:19:08 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now