EvoDunc Posted November 25, 2005 Share Posted November 25, 2005 Morning All,  Just about to remove my engine so had a quick once over last night to make sure I have all the tools etc that I'll need to get the work done. (Rubber gloves are stocked up 😬) The only area I'm a bit unsure of is the head size of the bolts that hold the bell housing and block together. I think theres ten in total and they have allen or hex socket heads. Can anyone tell me what size of allen/hex socket I need please.  Many thanks. Link to comment Share on other sites More sharing options...
Support Team Shaun_E Posted November 25, 2005 Support Team Share Posted November 25, 2005 8mm and 10mm Yellow SL #32 Link to comment Share on other sites More sharing options...
EvoDunc Posted November 25, 2005 Author Share Posted November 25, 2005 A legend - Many thanks. 😬 Link to comment Share on other sites More sharing options...
shn7 Posted November 25, 2005 Share Posted November 25, 2005 10 in total sounds like rather a lot. Is this a K series to type 9 bellhousing? I think IIRC there's 6. 2 at the top, 2 half way down (1 each side) and two at the bottom. Steve. Link to comment Share on other sites More sharing options...
EvoDunc Posted November 25, 2005 Author Share Posted November 25, 2005 Yeah it's a 1800 dry sumped k series to Caterhams 6 speed box. I think your right, isn't it two from B/housing and 4 from block to B/housing or similar? It was very cold when I looked!!! Link to comment Share on other sites More sharing options...
F355GTS Posted November 25, 2005 Share Posted November 25, 2005 Some cars have different ones into the sump 6mm I think, Kevsull found this on his Mark Link to comment Share on other sites More sharing options...
Dazzled Posted November 25, 2005 Share Posted November 25, 2005 Its two M12x 40mm at top from bell housing to block, two M12 x 60mm through the ears on the block assembly and into the bell housing then two M10 x 55mm bolts through bell housing to block. Its nice and warm inside where i'm reading the build guide!  Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now