Andrew Russell Posted December 10, 2001 Share Posted December 10, 2001 Can any advise the correct fuse rating that should be used for the dipped beam circuit on the Seven. I am using 55watt Cibie Z180's. Thanks Andrew Link to comment Share on other sites More sharing options...
Paul McKenzie Posted December 10, 2001 Share Posted December 10, 2001 Andrew, 15 amp Paul Link to comment Share on other sites More sharing options...
Paul D Jones Posted December 10, 2001 Share Posted December 10, 2001 55[watts] divided by 12 [volts] times two = 9.1666 Amps this is for headlights only you need to and the other lamps on the circuit to the equatuon so the other Paul is right at 15 Amp. Paul. Link to comment Share on other sites More sharing options...
Andrew Russell Posted December 11, 2001 Author Share Posted December 11, 2001 Thanks chaps, my A level physics was a long time a go! I have had a 15 amp fuse in place but it has started blowing and I wasn't sure if it was up to the load for some reason. Must be another problem! Andrew Link to comment Share on other sites More sharing options...
Tony Martyr Posted December 12, 2001 Share Posted December 12, 2001 I hope that the the calculation is not 'A' level! If so we are in deep trouble Link to comment Share on other sites More sharing options...
Andrew Russell Posted December 12, 2001 Author Share Posted December 12, 2001 Tony, My 11 plus was even longer ago........ Yes, I admit I should have engaged my memory/brain before posting such a simple request for advise, Blatchat is far too easy a source of enlightenment........ Apologies for wasting anyones time! Andrew Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now