Jump to content
Click here if you are having website access problems ×

Bolt size for accelerator cable retainer on 40DCOE


John Whyman

Recommended Posts

I lost both bolts at the same time today from the V shaped retainer for the accelerator cable on the 40 DCOE's on my X/Flow Supersprint.

 

Can anyone tell me the bolt size and thread for these little horrors. They appear to be about 6mm, but not sure if metric, Whit or whatever. Help appreciated, need a fix for tomorrow.

 

John W

 

 

 

Happy Motoring. thumbsup.gif C7 WJW.

Link to comment
Share on other sites

Same happened to me last year, doing about 120mph on the finishing straight at the nurburgring! 'twang'...then no throttle!

 

They are an M5, the same as the bolts holding the carb covers on. They replace one of the carb cover bolts underneath on each carb. As a temporary fix, take one of the bolts from the top cover of each carb and use these. I replaced them with allen key bolts, as they are a lot easier to tighten in the akward space. Use a drop of threadlock to secure them.

 

Good luck.

 

Robster.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...