prs Posted September 13, 2005 Share Posted September 13, 2005 Has covered 5k miles since being rebuilt (prior to this the unit had done 9k miles as a SS unit). 1.6K EU2. Fully ported/polished head retaining standard valves but with H/D springs, cams are QED375H, correctly timed with verniers. New liners were fitted along with new piston rings and bigend bearings. Mike Satur head gasket. Lightweight flywheel. This engine is in mint condition. With DTH TB's and Emerald (not part of the sale) this unit gave 155BHP and 122lb.ft. torque RR printout available. I can also supply the map (Mech repairs of Cheltenham did a full mapping session on this unit taking 4hrs). Great on the road pulling from low down and very smooth, used to return 35-40mpg. Road use only. £980 I also have available the original Supersport cams, SS ECU and inlet plenum with alloy TB and SS foam filter all of which is in mint condition. Phil S7SVN If interested bell me on 01544 230124 eves or email Link to comment Share on other sites More sharing options...
Slider7 Posted September 13, 2005 Share Posted September 13, 2005 Interested in the alloy TB & lightweight flywheel if you would consider to split 😬 Edited by - Slider@7 on 13 Sep 2005 13:39:13 Link to comment Share on other sites More sharing options...
Nifty Posted September 13, 2005 Share Posted September 13, 2005 Phil, I'm interested. Nifty. Keep off the straight and narrow 😬 Link to comment Share on other sites More sharing options...
Dannyboy Posted September 13, 2005 Share Posted September 13, 2005 Go Nifty GO!!! 😬 😬 😬 Dannyboy 153bhp and 184lb/ft ??????????????????? My arse Link to comment Share on other sites More sharing options...
Nifty Posted September 13, 2005 Share Posted September 13, 2005 It's the only way I'll get near to Gordy's 66sec times by next May *tongue* Keep off the straight and narrow 😬 Link to comment Share on other sites More sharing options...
Dannyboy Posted September 13, 2005 Share Posted September 13, 2005 C'mon Nifty.......you can do a 62 😬 😬 😬 😬 😬 just need a little more committment 😬 😬 😬 Dannyboy 153bhp and 184lb/ft ??????????????????? My arse Link to comment Share on other sites More sharing options...
prs Posted September 13, 2005 Author Share Posted September 13, 2005 Nifty YHM. Slider, will see what happens re: engine first - but basically the flywheel is part of the engine package. Phil S7SVN Link to comment Share on other sites More sharing options...
Nifty Posted September 13, 2005 Share Posted September 13, 2005 If I don't switch engines before next May I'll have to get Dave Jackson or Brodie Branch to dual drive so I can see just what the diminutive 1400 is capable of 😬 😬 *thumbup* Keep off the straight and narrow 😬 Link to comment Share on other sites More sharing options...
Slider7 Posted September 13, 2005 Share Posted September 13, 2005 OK, ... I understand But what about the TB 😬 ... ??? Link to comment Share on other sites More sharing options...
Alias Posted September 14, 2005 Share Posted September 14, 2005 I'm v interested in the SS ECU if you're prepared to split. I've already got the cams and plenum so don't need these! ----------------------------------------------------------------- 1400 Supersport with 6 gears and clamshell wings Link to comment Share on other sites More sharing options...
prs Posted September 16, 2005 Author Share Posted September 16, 2005 😬 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now