Weber Fuel Lines

[Casbar]

Just about to change my fuel lines to braded. At present, they carbs are connected in series, ie fuel in at the front carb, then linked to the second.

 

Some people have expressed the oppinion that each carb should be fed centrally from a "T" piece. If this is the case, is there any advantage, if so, what is the ideal route, as comming up from the centre doesn't seem feasable with the linkage and comp springs in the way, and the banjo's are on the left of the carbs.

 

[Roger King]

So long as you have adequate flow rate and pressure, it won't matter at all if you carry on as you are.