simon Posted May 3, 2000 Share Posted May 3, 2000 Does anybody know if caterham modify the rover k-series crankshaft to fit a spigot bearing? Link to comment Share on other sites More sharing options...
Roger King Posted May 3, 2000 Share Posted May 3, 2000 Yes, the rear of the crank is machined out on a jig to take a Ford/Vauxhall spigot bearing. Link to comment Share on other sites More sharing options...
Tim Seipel Posted May 6, 2000 Share Posted May 6, 2000 The crank is machined on the early crankshafts but the later ones are already machined out to accept a bearing for other rear drive applications! So then you have to make a thin walled shim sleeve. Link to comment Share on other sites More sharing options...
Tim Seipel Posted May 6, 2000 Share Posted May 6, 2000 The crank is machined on the early crankshafts but the later ones are already machined out to accept a bearing for other rear drive applications! So then you have to make a thin walled shim sleeve. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now