Jump to content
Click here if you are having website access problems ×

Remains of Garage clearance


Trevor Phillips

Recommended Posts

Some of the previous items now available again:

 

Samco blue hose converter 4" long 1.25" to 1.5" [new] £3.00

 

Brake cylinder race extension cap £3.00 [sold to Alex W]

 

7 core trailer wire approx 30m left on reel [new] £16.00

 

Sigma bike speedo and light [needs new batteries] £10.00

 

Alloy front anti-roll bar fitting blocks £5.00

 

Caterham 3/4" front Anti-roll bar (yellow) £8.00

 

Merlin supplied silencer wadding bag [new] £5.00 [sold to Aves]

 

Brake pipe flaring kit [new] £15.00 [sold to Chris, Speedybear]

 

Almost new Caterham Vauxhall header tank with over 3m Mocal blue pipe £20.00 [sold to Aves]

 

Burton Camshaft timing disk £3.00 [sold to Alex W]

 

Piston ring compressor £4.00 [sold to Alex W]

 

Pair of racing 2.25" X 9" 300lbs springs £6.00

 

In-line metal fuel filter £4.00

 

Foot pump - twin cylinder £5.00 [sold to John H]

 

Sierra clutch fork £4.00

 

Side indicator repeaters £6.00

 

Wilwood 5/8" Brake cylinder £10.00

 

Caterham Vauxhall header tank £5.00

 

BDA alloy header tank [painted black] and thermostat housing £8.00 [sold to Christophe]

 

Red handled safety cut-out cable £3.00

 

Mocal alloy remote filter head £5.00 [sold to Andrew]

 

Ford alternator alloy mount 71HF10039DA £5.00 [sold to AndyC]

 

Demon Tweeks Sound Barrier 8" Silencer 2" inlet £24.00

 

BDA alloy thermostat housing £2.00 [sold to Mark]

 

Bosch fuel injection pump 09202 £30.00

 

Blackbox rev limiter £15.00 [sold to Chris - Speedybear]

 

All items are used unless stated as new and I believe to be in working condition but can't guarantee at these prices.

 

Emails via the site facility. Thanks

 

 

Edited by - trevor on 10 Jun 2005 08:16:19

 

Edited by - Trevor on 10 Jun 2005 08:18:21

Link to comment
Share on other sites

Hi Trevor

 

Please can you put my name down for the BDA alloy thermostat housing £2.00 and if the tank is/comes available i'll have that to.

 

email beeing sent now to arrange payments etc.

 

Markc

 

 

Link to comment
Share on other sites

Hi Trevor, All arrived OK thanks. But,.............. how does the black box rev limiter wire in then? With just the four numbered (1-4) male spade type terminals, I'm at a loss without some pointers as to what goes where! The pot under the screw down plastic nut is obviuosly the limit set, but the rest???
Link to comment
Share on other sites

Hi Chris,

I had hoped that my race engineer would remember, but he's just called me back as says he can't.

 

I think, from memory, it was an RL3 from Demon Tweeks. Normally they hook up with a positive, an earth and a coil signal. Possibly something for a Club night to ask the technical intellectuals.

 

I'll keep looking through my old paperwork and let you know if something turns up.

 

Cheers

Link to comment
Share on other sites

Thanks Trevor. If you/I/race engineer/anyone can't figure it out then........................ "Does anyone want to buy a black box with terminals sticking out of it? Modern art classis" *eek*

 

Checked DT. Nothing that I can find re. RL3 !!!

 

Edited by - CHRIS CLARK on 6 Jun 2005 23:14:41

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...