Normans_Ghost Posted April 28, 2005 Share Posted April 28, 2005 I've got one of these but it's a standard size key. I need it for the lower wishbone screw and the clutch retaining screws. I'm going to buy a better, longer one or a hex key to fit a socket. If anyone wants me to get them one at the same time please post here. I will then buy the required number as long as they are not more than, say, £2.00 Norman Verona, 1989 BDR 220bhp, Reg: B16BDR, Mem No 2166, the full story here Link to comment Share on other sites More sharing options...
Normans_Ghost Posted April 28, 2005 Author Share Posted April 28, 2005 Snap-on have these available here The 7/32" hex with socket is £13.80 without socket is £2.59 I'll ring rouand in the morning to see if I can better price. Norman Verona, 1989 BDR 220bhp, Reg: B16BDR, Mem No 2166, the full story here Link to comment Share on other sites More sharing options...
Frying Pan Posted April 28, 2005 Share Posted April 28, 2005 Norman YHM Guy See some pictures of the build here. 5000 miles completed! Link to comment Share on other sites More sharing options...
F355GTS Posted April 28, 2005 Share Posted April 28, 2005 Norman I though the lower wishbone was 5/16", I'm going out ot measure one Mark Link to comment Share on other sites More sharing options...
Nifty Posted April 28, 2005 Share Posted April 28, 2005 Lower wishbone is 7/32" I'll have one please Norman *thumbup* Keep off the straight and narrow 😬 Link to comment Share on other sites More sharing options...
Normans_Ghost Posted April 29, 2005 Author Share Posted April 29, 2005 Nifty, thee and me then lad. Which one do you want, the expensive socket or the cheaper bit. I'm having the socket as I need it for the pressure plate screws. Norman Verona, 1989 BDR 220bhp, Reg: B16BDR, Mem No 2166, the full story here Link to comment Share on other sites More sharing options...
Nifty Posted April 29, 2005 Share Posted April 29, 2005 I could actually do with the whole set !!! Having thought a little harder Norman it is the top caphead bolt hex that I'm after, not the bottom one With socket Keep off the straight and narrow 😬 Link to comment Share on other sites More sharing options...
Normans_Ghost Posted April 30, 2005 Author Share Posted April 30, 2005 Nifty, Sealy (machine mart) have a set of hex & torx bits. Only problem with this set is it doesn't have 7/32". Look here Norman Verona, 1989 BDR 220bhp, Reg: B16BDR, Mem No 2166, the full story here Link to comment Share on other sites More sharing options...
simonbell Posted April 30, 2005 Share Posted April 30, 2005 I got mine from Cromwell Tools.....online. From memory there are 3 sizes required for a Caterham........the one for the lower damper mount, the one for the upper damper mount and the one for the caliper mounting bolts. Simon Bell - Caterham 7 Duratec R I`ve seen the future.....and it`s powered by duratec Check out the website here Link to comment Share on other sites More sharing options...
Normans_Ghost Posted April 30, 2005 Author Share Posted April 30, 2005 Simon, I think I've got more allen keys than you can shake a stick at. However, I've only one 7/32" which I need for the lower shocker screw AND my clutch pp screws. I'm getting the socket mounted bit just so I'm not stuck on a weekend with a pressure plate I can't remove (cause I've lost the allen key) Norman Verona, 1989 BDR 220bhp, Reg: B16BDR, Mem No 2166, the full story here Link to comment Share on other sites More sharing options...
Mike Oxbiggar Posted April 30, 2005 Share Posted April 30, 2005 Sorry - miss post! Edited by - Jellybelly on 30 Apr 2005 20:26:08 Link to comment Share on other sites More sharing options...
Alex Wong1697456877 Posted May 1, 2005 Share Posted May 1, 2005 Yes please! Link to comment Share on other sites More sharing options...
Normans_Ghost Posted May 1, 2005 Author Share Posted May 1, 2005 Sorry guys, ended up getting one from cromwell here 7/32" HEX BIT ADAPTOR 3/8" SQ DR KEN-582-6110K £6.92/ea. £4.15/ea. Half the price of Snap On, thanks go to Simon. I also got 4 ratchet type axle stands to make the post worth it. Norman Verona, 1989 BDR 220bhp, Reg: B16BDR, Mem No 2166, the full story here Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now