Tonmawrie Posted April 13, 2005 Share Posted April 13, 2005 Hi,can some one give me the procedure for chaning from inerta reel to four points in a caterham please to save me the hassle of trying to guess and ending up dismantling the car. Thanks jeremy Link to comment Share on other sites More sharing options...
Support Team Shaun_E Posted April 13, 2005 Support Team Share Posted April 13, 2005 Fitting instructions are in this manual section 7.6. There should be bosses in the chassis either side of the seat and in the top chassis rail behind the seat. You'll have to remove the boot cover to get at the top ones and punch holes in the cover to refit. Yellow SL #32 Link to comment Share on other sites More sharing options...
Lotus Boy Posted April 13, 2005 Share Posted April 13, 2005 To remove the inertias you have to remove the pop rivetted panel inside the rear wheel arch and from there you can remove all the gubbins. Personally though, when I recently fitted my harnesses I left the inertias in place and tucked them behind the seat. Dave Link to comment Share on other sites More sharing options...
Burt1969 Posted April 13, 2005 Share Posted April 13, 2005 also depends on the age of the car. Mine would have to go back to arch... Our Kitty! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now