pingu Posted March 2, 2005 Share Posted March 2, 2005 folks, what's the torque seeting for bolts for the coolant outlet elbow to cylinder head on an 1800K series? engine manual doesn't seem to mention this... thanks --pingu Link to comment Share on other sites More sharing options...
prs Posted March 2, 2005 Share Posted March 2, 2005 I've always replaced mine by first applying a tiny smear of Hylomar and then torqueing to 6lb.ft. Phil S7SVN Link to comment Share on other sites More sharing options...
Grubbster Posted March 2, 2005 Share Posted March 2, 2005 Can't remember for sure but it is not very much at all. Hang on, I have the build manual on my PC, I'll just check. Roadsport build photo's here Le Mans 2004 photo's here Link to comment Share on other sites More sharing options...
Grubbster Posted March 2, 2005 Share Posted March 2, 2005 Not in the build manual - it must be in the K series manual that I don't have with me, sorry! Roadsport build photo's here Le Mans 2004 photo's here Link to comment Share on other sites More sharing options...
pingu Posted March 2, 2005 Author Share Posted March 2, 2005 its not in the k series manual either, hence my question. i guessed 10nm, which is just a bit more than 6 ftlb (and also used a touch of hylomar) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now