KDEANO Posted February 24, 2005 Share Posted February 24, 2005 I have a standard 1700 Supersprint and new piston rings are in and bedded down but I still get a passenger footwell full of oil + and overfill bottle brimmed to the top after revving to 6000-6100 rpm a few times. I know there's been many threads in the past talking of a simple solution but I haven't managed to find them on the archive. I think it was a roger king invention but I can't be sure. Can anybody remind me what is required and where I can get the work done? I'm sick of emptying the overfill bottle every blat. cheers Link to comment Share on other sites More sharing options...
Manxseven Posted February 24, 2005 Share Posted February 24, 2005 KDEANO, See this here L7 BDA Supersprint Joy here 😬 Link to comment Share on other sites More sharing options...
Terry Field Posted February 24, 2005 Share Posted February 24, 2005 KDEANO, This doesn't sound like a breather problem in the usual sense of oil blowing past the rings or valves, if you have just had the rings replaced.You also seem to be chucking out a lot of oil if the bottle is filling up. Could it be that you have simply overfilled it with oil? Have you had any reason to recalibrate the dispstick. Can't think what else it may be Terry Q783 OOR. Team Lotus colours with flares. Link to comment Share on other sites More sharing options...
KDEANO Posted February 24, 2005 Author Share Posted February 24, 2005 It's posible I could have overfilled it but I do check the dipstick regularly. I haven't changed sump or anything so there's no real reason to recalibrate the dipstick (well none that I could think of). I'll keep running her as she is and closely monitor the situation to see if the bottle is still filling up affter the initial 2 inches of oil which collects in the breather bottle. thanks for the advice kristian Link to comment Share on other sites More sharing options...
budgie Posted February 24, 2005 Share Posted February 24, 2005 The Roger King solution was to route the breather pipe to the rocker cover then take the breather from another point on the rocker cover to the catch bottle. But it sounds as though yours has something wrong-you shouldn't be getting that much into the bottle as it is. Link to comment Share on other sites More sharing options...
Leadership Team RogNeedham Posted February 24, 2005 Leadership Team Share Posted February 24, 2005 I agree with Budgie. The only time my xflow filled the catch tank was on track days as I didn't have dry sump. On normal road use there was never a problem no matter what the revs. Rog Link to comment Share on other sites More sharing options...
Gavin Posted February 25, 2005 Share Posted February 25, 2005 KDEANO, Ideally the breather hose should exit the block fitting as straight up / vertical as possible. I have a long hose that runs vertically in-line with the dipstick, then GRADUALLY arcs over into the catch tank - keeping the hose as high as possible. You are running a mechanical ( cam driven ) fuel pump? If so the driven diaphragm arm is trying to ' bail out ' some of the oil through the block breather. By running the hose straight up ( & high up ) you are making it much harder for the oil to get into the catch tank. I have found that this helps a lot, and hope it might be of some assistance. Gavin Link to comment Share on other sites More sharing options...
Terry Field Posted February 25, 2005 Share Posted February 25, 2005 KDEANO Having read the thread again, I think you need to install the Roger King set up. Gavin's method is trying to overcome the problem by going straight and high, but if you have a twin pipe system that should resolve the problem. My catch tank is on the rear bulkhead with the top of the tank at the sam level as the top of the rocker cover. On a track day it is not unusual to chuck out up to a pint of oil in the day, but any more than that and I think you need to look for a different cause than simple high revs/crankcase pressure. In 'normal' but vigorous driving on the road, there is very little oil coming out. I have a description of the work I did on the breather and some hard copy photos. E-mail me if you would like me to send them to you Terry Q783 OOR. Team Lotus colours with flares. Link to comment Share on other sites More sharing options...
Gavin Posted February 26, 2005 Share Posted February 26, 2005 ' My method ' is, in truth, some knowledge gleened from Roger King . It is a simple solution. It may help. It has worked extremely well for me, even on trackdays. As Terry says, the ' twin pipe ' set up should work best. Edited by - Gavin on 26 Feb 2005 04:33:20 Link to comment Share on other sites More sharing options...
DW Posted March 3, 2005 Share Posted March 3, 2005 Re the link from Manxseven. I've now done the work on my Xflow but ended up with a different solution: The breather pipe has been left as it was going to the catchtank, although like Gavin says I've made sure it goes up vertical first. It's also worth raising the height of the catchtank too if you can, so it's above the height of the breather outlet. I've then run another breather pipe from the top of the rocker cover to the same catchtank. The theory here is that it will relieve some of the pressure that builds up in the crankcase that's forcing the oil up the first breather pipe. Whilst it doesn't recycle the oil, the idea is that this solves the problem rather than the symptom. So far it works well and getting next to no oil blown out. David 1700XF - http://groups.msn.com/WilkesCaterhamPages Edited by - DW on 3 Mar 2005 18:52:32 Edited by - DW on 3 Mar 2005 18:54:01 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now