John Gaines Posted January 28, 2005 Share Posted January 28, 2005 I am after some old headlamp stays to convert some small lamps with carbon pods. The condition is not important as they will be cut down and have a new bracket brazed to them. Thanks, John. Link to comment Share on other sites More sharing options...
John Gaines Posted January 29, 2005 Author Share Posted January 29, 2005 A wing stay would also do the job as I have just realized that they are also 16mm diameter. Regards John. Link to comment Share on other sites More sharing options...
John Gaines Posted January 31, 2005 Author Share Posted January 31, 2005 Last try before I visit the stock holders Regards John. Link to comment Share on other sites More sharing options...
Area Representative Nick Chan Posted January 31, 2005 Area Representative Share Posted January 31, 2005 Are you after ones from a flared wing or cycle wing car? If flared then I have a pair if you want to drop me a line. Cheers Nick Yellow HPC - A 2.0 VX - 😬 Link to comment Share on other sites More sharing options...
John Gaines Posted February 1, 2005 Author Share Posted February 1, 2005 Thanks Nick, but it would need to be the cycle wings as they use the same tube diameter as the headlamp stays. Regards, John. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now