R500 with R101 spec engine Now Sold and staying in Suffolk

[Petrolhead]

If I was buying an R5 again I would now buy this as it probable suits my needs better.

 

Cracking price and confused as to why it hasn't sold

 

R5 no 65 😬

I am STILL after a pair of half doors

[Nifty]

Only got to reduce it by another £10,000 Richard and it'll be in my league *tongue*

 

Thanks for the offer of the SR8 at Silverstone yesterday but I had guests ☹️

(Hope you got my text )

 

Keep off the straight and narrow 😬

[Richard Ince]

Now back from holiday and ready to show car.

[Richard Ince]

Now submitted to PistonHeads. If you want a well maintained R500 this is one that has to be seen.

[Richard Ince]

BTTT.

[R400C]

Can't believe that this car hasn't sold at this time of year! It's alot of car for the money!

 

R400 C

[Richard Ince]

I cannot understand either, it is immaculate and nearly all wearing part have been replaced or rebuilt.

[trailerman]

I'm not in the market now sadly; if I was I'd bite your hands off but still be a bit, er, intimidated by its fame and performance in your hands! how about offering a day's tuition in the price?

[Richard Ince]

Now sold and the car staying in Suffolk.

 

Standby for loads of R500 spares including many spare sets of R500 rims and tyres!

 

Edited by - Richard Ince on 11 Apr 2005 20:21:21

[Petrolhead]

Good but also sad news

 

Mail me with what spares you may have please Mike

 

R5 no 65 😬

[Irrelevant]

I'd be interested in a set of MB rims, and anything else actually. You haven't got a spare cage per-chance?......

 

Getting there....

[Andrew Dent]

Richard

 

Would be interested in ACB10s etc if you have any going.

 

I dont care who's it is, It's floating

[Richard Ince]

Guys I need to think how to sell the following list of R500 spares, watch this space.

 

2 x Rear lights

1 x Alternator belt

1 x Oil pump belt

1 x ECU (S/H)

3 x Alternator adjustment bracket

1 x S/h oil filler cap

1 x Throttle pot

1 x Radiator fan wiring kit

1 x S/h oil pressure sender and pipe

1 x Fuel tank outlet adaptor

1 x Throttle cable

1 x Master switch

2 x Oil filler tower kit

2 x Ignition coils (new type)

2 x Plug leads (new type)

1 x Alternator mounting bracket

1 x Fuel rail and injectors (S/H)

1 x Throttle pot (S/H)

1 x Crank position sensor (S/H)

1 x Air sensor (S/H)

1 x Set front brake pads

1 x Set rear brake pads

2 x De Dion ears

2 x Track rod ends

2 x Steering arms

2 x Stub axle (old type)

2 x Rubber engine mountings

1 x L/H engine mounting bracket

1 x L/H upright

1 x R/H upright

1 x Watts linkage bell crank (with spacers)

1 x Watts linkage short arm

1 x Watts linkage long arm

1 x S/H rear drive flange

2 x Front top wishbones

2 x Watts linkage rose joints

1 x Diff mounting bolt

16 x Wheel nuts (no washers)

2 x Rear wheel bearing housings complete

1 x Left hand lower wishbone

1 x Right hand lower wishbone

2 x S/H clutch cables

2 x Oil cooler pipes

1 x Left hand mudguard stay

1 x Right hand mudguard stay

1 x S/h alternator rebuilt

1 x Starter motor (with spacer)

SPACER

1 x Brake master cylinder

1 x Oil cooler kit

1 x Radiator

1 x Radiator electric fan

1 x ‘A’ Frame

1 x De Dion tube (latest type)

1 x S/H steering rack

1 x Left hand driveshaft

1 x Right hand driveshaft

1 x 3.62 diff unit (rebuilt)

1 x Nose cone with grille (black)

2 x Rear wings (black)

1 x BTB exhaust

1 x New front wing (black)

2 x S/H front wings (black)

 

[Irrelevant]

How much for the black nose cone please?

 

Getting there....

[Petrolhead]

Interested in:

 

Dedion Ears - are they the xply ones ie ACB10/slicks?

BTB Exhaust - will this fit the std R5 manifold and will it be quieter than std R5 exhaust

 

R5 no 65 😬

[Mar-07]

Is the 'oil filler tower kit' the conning tower that bolts onto the bellhousing dry sump tank? Very interested if it is, I am also interested in the injectors and fuel rail. Thanks

 

[Frying Pan]

First dibs on the throttle cable please -assme this is the standard Rover part..

 

Thanks

 

Guy

 

See some pictures of the build here. 5000 miles completed!

[Neil Williams]

Richard,

If the Diff is an LSD I'm interested. Please let me know how much you want for it via my profile .

 

Regards,

Neil

[Alex Wong1697456877]

Hi Richard,

 

Track rod ends - How much for these?

 

Sorry about the BMS thread.........

 

Alex

[Terry_M]

Richard - YHM re starter motor

 

Terry

[SLR No.77]

Richard, YHM re one of the towers - assuming this is the dry sump coning tower?

 

Stu.

[SLR No.77]

Richard, Y also HM re oil pump belt 😬

 

Stu.

[ben7]

Richard, YHM re left and right wishbones.

 

I'll also have first RESERVE dibs on one of the oil towers please, if that's ok.

 

Edited, having actually read the list again, to add the steering arms, front top wishbones, oil cooler kit and rear wings

 

Edited by - V500OSV on 12 Apr 2005 11:28:08

[lrem]

Hi Richard,

 

YHM re. brake master cylinder.

 

Cheers,

 

Lionel

[Powderpuff]

Richard,

 

YHM re rear w/bearings and rad.

 

Cheers

 

Gordon

 

The name's Puff, Powder Puff

N7XTC