Spotlamp mounting Q/R clips

[John Gaines]

I am considering mounting some spotlamps on the roll over bar, but I would like to be able to clip them into a bracket mounted on the bar. Does anyone know of a manufacturer of the type of quick release clip that you would find on a ruckcsack?

There was a thread about a year ago where someone had a link to a company that made large nylon clamps, I think it was to do with a wheel rack?

Any ideas ?

Regards John.

 

 

[Tony C]

Several years ago I mounted some spotlights on the roll-over bar on a pick-up. The inevitable vibration of the lamps with the light source behind, gave me a headache.

 

Hard to believe, but there you go!

[John Gaines]

Thanks Tony, but I think that if the clamps are tight enough and the stems are short it should be ok.

The original thread that had some nylon clamps was regarding a wheel rack that was used to transport track day tyres, I have tried the search system but to no avail. ☹️

 

 

[Shaun_E]

The clamps you refer to are from Stauff. They aren't really quick release and you will need to weld the light mounting to them but they seem to do the job. I was at one time looking to build a removable luggage case that would clamp to the roll bar and the bottom chassis rail and I envisaged using these clamps.

the following threads might be of use;

http://www.blatchat.com/T.asp?id=63725

http://www.blatchat.com/T.asp?id=45969

 

Yellow SL #32

For Sale: wet sump, ali bellhousing, chrome headlights, sill protectors

Wanted: Black headlights, blank carbon dash

[DanB]

Try using hydraulic hose clamps from Stauff - www.stauff.com

[John Gaines]

Many thanks chaps!

Regards, John.