Rust Red Seven Posted December 3, 2004 Share Posted December 3, 2004 All you stack dash fitters!!!!!!!! Last night my spedo needle started wobbling and jurking about. Furthe investigation showed the bearing behind the needle worn out!!!!!!! Any one got an old CC 70mm speedo ? Regards Rust Red Link to comment Share on other sites More sharing options...
John Howe Posted December 3, 2004 Share Posted December 3, 2004 Yes, 11,000 miles on the clock and I think it is 80mm in size but it is most certainly out of a Caterham JH Deliveries by Saffron, the yellow 222bhp Sausage delivery machine Link to comment Share on other sites More sharing options...
Rust Red Seven Posted December 3, 2004 Author Share Posted December 3, 2004 John very interested and will get my part no's and maker and e mail you offline on monday. Thanks for the response. Rust Red Link to comment Share on other sites More sharing options...
F355GTS Posted December 3, 2004 Share Posted December 3, 2004 RR7 is it marked Caterham on the face or VDO? Mark Link to comment Share on other sites More sharing options...
Rust Red Seven Posted December 3, 2004 Author Share Posted December 3, 2004 Mark It has no marks on the face but it does have VDO on the sticker on the side and Made in germany on the back. It is an 80mm case, as you said John. John YHM Rust Red Edited by - Rust Red Seven on 3 Dec 2004 20:04:31 Link to comment Share on other sites More sharing options...
Rust Red Seven Posted December 6, 2004 Author Share Posted December 6, 2004 Checked John Howes at the weekend and can now confirm its an 80 mm bezzle and it is VDO different drive mechanisn to the caterham one. Thanks for the thought John and still an option if stuck. Any one got an VDO speedo lying about not doing anything Cheers Rust Red Link to comment Share on other sites More sharing options...
F355GTS Posted December 6, 2004 Share Posted December 6, 2004 RR i think so, I'll go and check and post again Mark Link to comment Share on other sites More sharing options...
F355GTS Posted December 6, 2004 Share Posted December 6, 2004 RR I have an 80mm VDO speedo circa 20k miles reading are there any markings ie part number on yours? this one has VDO on front lower face Mark Link to comment Share on other sites More sharing options...
Rust Red Seven Posted December 7, 2004 Author Share Posted December 7, 2004 Mark, it does have a part no on it. Its at home so i will post this up later on tonight. It has the sae 5/8" cable connector on it, two light sockets one top and one bottom. Post later with part no Where abouts are you? Rust Red Link to comment Share on other sites More sharing options...
F355GTS Posted December 7, 2004 Share Posted December 7, 2004 RR near Reading Mark Link to comment Share on other sites More sharing options...
Rust Red Seven Posted December 9, 2004 Author Share Posted December 9, 2004 Simon YHM Rust Red Link to comment Share on other sites More sharing options...
Jenson Button Posted December 9, 2004 Share Posted December 9, 2004 Assume you're sorted now, but you could always try here - it's 80mm though... Or it may help to identify the speedos that some of the others have posted about.... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now